[PATCH 3/5] arm64: dts: renesas: s4sk: Access rswitch ports via phandles

[Marek Vasut <marek.vasut+renesas@xxxxxxxxxxx>]

The r8a779f0.dtsi now contains labels for each rswitch port in
the form 'rswitchportN'. Use those to access rswitch ports and
slightly reduce the depth of this board DT. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxxxx>
---
Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Cc: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-renesas-soc@xxxxxxxxxxxxxxx
---
 arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts | 67 +++++++++----------
 1 file changed, 31 insertions(+), 36 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts b/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts
index 5d71d52f9c654..4bf526535ee05 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts
@@ -179,53 +179,48 @@ &rswitch {
 	pinctrl-0 = <&tsn0_pins>, <&tsn1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
+};
+
+&rswitchport0 {
+	reg = <0>;
+	phy-handle = <&ic99>;
+	phy-mode = "sgmii";
+	phys = <&eth_serdes 0>;
 
-	ethernet-ports {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		port@0 {
-			reg = <0>;
-			phy-handle = <&ic99>;
-			phy-mode = "sgmii";
-			phys = <&eth_serdes 0>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ic99: ethernet-phy@1 {
-					reg = <1>;
-					compatible = "ethernet-phy-ieee802.3-c45";
-					interrupts-extended = <&gpio3 10 IRQ_TYPE_LEVEL_LOW>;
-				};
-			};
-		};
-
-		port@1 {
+		ic99: ethernet-phy@1 {
 			reg = <1>;
-			phy-handle = <&ic102>;
-			phy-mode = "sgmii";
-			phys = <&eth_serdes 1>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ic102: ethernet-phy@2 {
-					reg = <2>;
-					compatible = "ethernet-phy-ieee802.3-c45";
-					interrupts-extended = <&gpio3 11 IRQ_TYPE_LEVEL_LOW>;
-				};
-			};
+			compatible = "ethernet-phy-ieee802.3-c45";
+			interrupts-extended = <&gpio3 10 IRQ_TYPE_LEVEL_LOW>;
 		};
+	};
+};
 
-		port@2 {
-			status = "disabled";
+&rswitchport1 {
+	reg = <1>;
+	phy-handle = <&ic102>;
+	phy-mode = "sgmii";
+	phys = <&eth_serdes 1>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ic102: ethernet-phy@2 {
+			reg = <2>;
+			compatible = "ethernet-phy-ieee802.3-c45";
+			interrupts-extended = <&gpio3 11 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };
 
+&rswitchport2 {
+	status = "disabled";
+};
+
 &rwdt {
 	timeout-sec = <60>;
 	status = "okay";
-- 
2.45.2