Add the node for the rk3328 usb3 phy. This node provides a combined usb2
and usb3 phy which are permenantly tied to the dwc3 usb3 controller.
Signed-off-by: Peter Geis <pgwipeout@xxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 39 ++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 7d992c3c01ce..181a900d41f9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -903,6 +903,43 @@ u2phy_host: host-port {
};
};
+ usb3phy: usb3-phy@ff460000 {
+ compatible = "rockchip,rk3328-usb3phy";
+ reg = <0x0 0xff460000 0x0 0x10000>;
+ clocks = <&cru SCLK_REF_USB3OTG>, <&cru PCLK_USB3PHY_OTG>, <&cru PCLK_USB3PHY_PIPE>;
+ clock-names = "refclk-usb3otg", "usb3phy-otg", "usb3phy-pipe";
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "bvalid", "id", "linestate", "rxdet";
+ resets = <&cru SRST_USB3PHY_U2>,
+ <&cru SRST_USB3PHY_U3>,
+ <&cru SRST_USB3PHY_PIPE>,
+ <&cru SRST_USB3OTG_UTMI>,
+ <&cru SRST_USB3PHY_OTG_P>,
+ <&cru SRST_USB3PHY_PIPE_P>;
+ reset-names = "usb3phy-u2-por", "usb3phy-u3-por",
+ "usb3phy-pipe-mac", "usb3phy-utmi-mac",
+ "usb3phy-utmi-apb", "usb3phy-pipe-apb";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ usb3phy_utmi: utmi-port@ff470000 {
+ compatible = "rockchip,rk3328-usb3phy-utmi";
+ reg = <0x0 0xff470000 0x0 0x8000>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usb3phy_pipe: pipe-port@ff478000 {
+ compatible = "rockchip,rk3328-usb3phy-pipe";
+ reg = <0x0 0xff478000 0x0 0x8000>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+
sdmmc: mmc@ff500000 {
compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff500000 0x0 0x4000>;
@@ -1067,6 +1104,8 @@ usbdrd3: usb@ff600000 {
clock-names = "ref_clk", "suspend_clk",
"bus_clk";
dr_mode = "otg";
+ phys = <&usb3phy_utmi>, <&usb3phy_pipe>;
+ phy-names = "usb2-phy", "usb3-phy";
phy_type = "utmi_wide";
snps,dis-del-phy-power-chg-quirk;
snps,dis_enblslpm_quirk;
--
2.39.5
