From: Fabio Estevam <festevam@xxxxxxx>
On the i.MX5 chips the peripheral interrupts are represented directly only
by their interrupt numbers.
The CCM nodes are not following this format and cause the following
dt-schema warnings:
ccm@73fd4000: interrupts: [[0], [71], [4], [0], [72], [4]] is too long
Fix it by passing only the two interrupt numbers.
Run-time tested in on an imx53-qsb board.
Signed-off-by: Fabio Estevam <festevam@xxxxxxx>
---
arch/arm/boot/dts/nxp/imx/imx50.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx51.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx53.dtsi | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx50.dtsi b/arch/arm/boot/dts/nxp/imx/imx50.dtsi
index 1b6f444443dd..f0b12a70f614 100644
--- a/arch/arm/boot/dts/nxp/imx/imx50.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx50.dtsi
@@ -338,7 +338,7 @@ src: reset-controller@53fd0000 {
clks: ccm@53fd4000 {
compatible = "fsl,imx50-ccm";
reg = <0x53fd4000 0x4000>;
- interrupts = <0 71 0x04 0 72 0x04>;
+ interrupts = <71 72>;
#clock-cells = <1>;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51.dtsi b/arch/arm/boot/dts/nxp/imx/imx51.dtsi
index cc88da4d7785..2bfb6baa67fc 100644
--- a/arch/arm/boot/dts/nxp/imx/imx51.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx51.dtsi
@@ -458,7 +458,7 @@ src: reset-controller@73fd0000 {
clks: ccm@73fd4000 {
compatible = "fsl,imx51-ccm";
reg = <0x73fd4000 0x4000>;
- interrupts = <0 71 0x04 0 72 0x04>;
+ interrupts = <71 72>;
#clock-cells = <1>;
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53.dtsi
index 845e2bf8460a..b7147cc7a316 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx53.dtsi
@@ -598,7 +598,7 @@ src: reset-controller@53fd0000 {
clks: ccm@53fd4000 {
compatible = "fsl,imx53-ccm";
reg = <0x53fd4000 0x4000>;
- interrupts = <0 71 0x04 0 72 0x04>;
+ interrupts = <71 72>;
#clock-cells = <1>;
};
--
2.34.1
