Complies with generic spi-controller and atmel,at91rm9200-spi bindings.
Fixes dtc warnings, when actually adding spi target device nodes on
board dts files including this soc dtsi.
Signed-off-by: Alexander Dahl <ada@xxxxxxxxxxx>
---
arch/arm/boot/dts/microchip/sam9x60.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
index 36944e18a329..b8b2c1ddf3f1 100644
--- a/arch/arm/boot/dts/microchip/sam9x60.dtsi
+++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
@@ -197,6 +197,8 @@ spi4: spi@400 {
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
clock-names = "spi_clk";
dmas = <&dma0
@@ -268,6 +270,8 @@ spi5: spi@400 {
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
clock-names = "spi_clk";
dmas = <&dma0
@@ -768,6 +772,8 @@ spi0: spi@400 {
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
clock-names = "spi_clk";
dmas = <&dma0
@@ -839,6 +845,8 @@ spi1: spi@400 {
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
clock-names = "spi_clk";
dmas = <&dma0
@@ -910,6 +918,8 @@ spi2: spi@400 {
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
clock-names = "spi_clk";
dmas = <&dma0
@@ -981,6 +991,8 @@ spi3: spi@400 {
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
clock-names = "spi_clk";
dmas = <&dma0
base-commit: 9d89551994a430b50c4fffcb1e617a057fa76e20
--
2.39.5
