Added the uart1_pe_pins pinctrl for use by the NetCube
Systems Kumquat board
Signed-off-by: Lukas Schmid <lukas.schmid@xxxxxxxxxx>
Reviewed-by: Andre Przywara <andre.przywara@xxxxxxx>
---
arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
index 9e13c2aa8911..f909b1d4dbca 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
@@ -416,6 +416,12 @@ uart0_pb_pins: uart0-pb-pins {
function = "uart0";
};
+ /omit-if-no-ref/
+ uart1_pe_pins: uart1-pe-pins {
+ pins = "PE21", "PE22";
+ function = "uart1";
+ };
+
uart2_pins: uart2-pins {
pins = "PB0", "PB1";
function = "uart2";
--
2.47.1
