On Tue, 07 Jan 2025 10:23:39 -0600, Ninad Palsule wrote: > Add device tree binding document for the IPMB device interface driver. > > Signed-off-by: Ninad Palsule <ninad@xxxxxxxxxxxxx> > --- > .../devicetree/bindings/ipmi/ipmb-dev.yaml | 42 +++++++++++++++++++ > 1 file changed, 42 insertions(+) > create mode 100644 Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dts:21.17-30: Warning (reg_format): /example-0/i2c/i2c@10:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dts:18.13-24.11: Warning (i2c_bus_bridge): /example-0/i2c: incorrect #address-cells for I2C bus Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dts:18.13-24.11: Warning (i2c_bus_bridge): /example-0/i2c: incorrect #size-cells for I2C bus Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'i2c_bus_bridge' Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dts:19.20-23.15: Warning (avoid_default_addr_size): /example-0/i2c/i2c@10: Relying on default #address-cells value Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dts:19.20-23.15: Warning (avoid_default_addr_size): /example-0/i2c/i2c@10: Relying on default #size-cells value Documentation/devicetree/bindings/ipmi/ipmb-dev.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size' doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250107162350.1281165-3-ninad@xxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
