Hello,
Please review the patch set.
V2:
---
Fixed CHECK_DTBS errors by
- Using generic node names
- Documenting phy-mode rgmii-rxid in ftgmac100.yaml
- Adding binding documentation for IPMB device interface
NINAD PALSULE (7):
ARM: dts: aspeed: system1: Add IPMB device
ARM: dts: aspeed: system1: Add GPIO line name
ARM: dts: aspeed: system1: Add RGMII support
ARM: dts: aspeed: system1: Reduce sgpio speed
ARM: dts: aspeed: system1: Update LED gpio name
ARM: dts: aspeed: system1: Remove VRs max8952
ARM: dts: aspeed: system1: Mark GPIO line high/low
Ninad Palsule (3):
dt-bindings: net: faraday,ftgmac100: Add phys mode
bindings: ipmi: Add binding for IPMB device intf
ARM: dts: aspeed: system1: Disable gpio pull down
.../devicetree/bindings/ipmi/ipmb-dev.yaml | 42 +++++
.../bindings/net/faraday,ftgmac100.yaml | 3 +
.../dts/aspeed/aspeed-bmc-ibm-system1.dts | 177 ++++++++++++------
3 files changed, 163 insertions(+), 59 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml
--
2.43.0
