DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding. While touching the lines do
other non-functional changes: replace raw number with proper define for
GPIO flag and use generic node name.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../bindings/sound/adi,ssm2518.yaml | 20 ++++++-----
.../bindings/sound/everest,es71x4.yaml | 10 +++---
.../bindings/sound/everest,es7241.yaml | 19 +++++-----
.../devicetree/bindings/sound/fsl,easrc.yaml | 32 ++++++++---------
.../devicetree/bindings/sound/fsl,xcvr.yaml | 34 +++++++++---------
.../bindings/sound/intel,keembay-i2s.yaml | 32 ++++++++---------
.../bindings/sound/neofidelity,ntp8918.yaml | 26 +++++++-------
.../devicetree/bindings/sound/ti,pcm6240.yaml | 32 +++++++++--------
.../devicetree/bindings/sound/ti,tas2562.yaml | 30 ++++++++--------
.../devicetree/bindings/sound/ti,tas2770.yaml | 34 +++++++++---------
.../devicetree/bindings/sound/ti,tas2781.yaml | 36 ++++++++++---------
.../devicetree/bindings/sound/ti,tas27xx.yaml | 34 +++++++++---------
.../devicetree/bindings/sound/ti,tas57xx.yaml | 34 +++++++++---------
13 files changed, 195 insertions(+), 178 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml b/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml
index f3f32540779c..f1beae84cad1 100644
--- a/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml
+++ b/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml
@@ -36,12 +36,14 @@ unevaluatedProperties: false
examples:
- |
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
- codec@34 {
- compatible = "adi,ssm2518";
- reg = <0x34>;
- gpios = <&gpio 5 0>;
- };
- };
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ codec@34 {
+ compatible = "adi,ssm2518";
+ reg = <0x34>;
+ gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/sound/everest,es71x4.yaml b/Documentation/devicetree/bindings/sound/everest,es71x4.yaml
index fd1b32812228..efe9f3fd3778 100644
--- a/Documentation/devicetree/bindings/sound/everest,es71x4.yaml
+++ b/Documentation/devicetree/bindings/sound/everest,es71x4.yaml
@@ -53,10 +53,10 @@ unevaluatedProperties: false
examples:
- |
- codec {
- compatible = "everest,es7134";
- #sound-dai-cells = <0>;
- VDD-supply = <&vdd_supply>;
- };
+ codec {
+ compatible = "everest,es7134";
+ #sound-dai-cells = <0>;
+ VDD-supply = <&vdd_supply>;
+ };
...
diff --git a/Documentation/devicetree/bindings/sound/everest,es7241.yaml b/Documentation/devicetree/bindings/sound/everest,es7241.yaml
index f179af758730..e5cfb40f1ef2 100644
--- a/Documentation/devicetree/bindings/sound/everest,es7241.yaml
+++ b/Documentation/devicetree/bindings/sound/everest,es7241.yaml
@@ -54,14 +54,15 @@ unevaluatedProperties: false
examples:
- |
- #include <dt-bindings/gpio/gpio.h>
- codec {
- compatible = "everest,es7241";
- #sound-dai-cells = <0>;
- reset-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
- VDDP-supply = <&vddp_supply>;
- VDDA-supply = <&vdda_supply>;
- VDDD-supply = <&vddd_supply>;
- };
+ #include <dt-bindings/gpio/gpio.h>
+
+ codec {
+ compatible = "everest,es7241";
+ #sound-dai-cells = <0>;
+ reset-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ VDDP-supply = <&vddp_supply>;
+ VDDA-supply = <&vdda_supply>;
+ VDDD-supply = <&vddd_supply>;
+ };
...
diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
index 0782f3f9947f..c454110f4281 100644
--- a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
@@ -87,20 +87,20 @@ examples:
#include <dt-bindings/clock/imx8mn-clock.h>
easrc: easrc@300c0000 {
- compatible = "fsl,imx8mn-easrc";
- reg = <0x300c0000 0x10000>;
- interrupts = <0x0 122 0x4>;
- clocks = <&clk IMX8MN_CLK_ASRC_ROOT>;
- clock-names = "mem";
- dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>,
- <&sdma2 18 23 0> , <&sdma2 19 23 0>,
- <&sdma2 20 23 0> , <&sdma2 21 23 0>,
- <&sdma2 22 23 0> , <&sdma2 23 23 0>;
- dma-names = "ctx0_rx", "ctx0_tx",
- "ctx1_rx", "ctx1_tx",
- "ctx2_rx", "ctx2_tx",
- "ctx3_rx", "ctx3_tx";
- firmware-name = "imx/easrc/easrc-imx8mn.bin";
- fsl,asrc-rate = <8000>;
- fsl,asrc-format = <2>;
+ compatible = "fsl,imx8mn-easrc";
+ reg = <0x300c0000 0x10000>;
+ interrupts = <0x0 122 0x4>;
+ clocks = <&clk IMX8MN_CLK_ASRC_ROOT>;
+ clock-names = "mem";
+ dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>,
+ <&sdma2 18 23 0> , <&sdma2 19 23 0>,
+ <&sdma2 20 23 0> , <&sdma2 21 23 0>,
+ <&sdma2 22 23 0> , <&sdma2 23 23 0>;
+ dma-names = "ctx0_rx", "ctx0_tx",
+ "ctx1_rx", "ctx1_tx",
+ "ctx2_rx", "ctx2_tx",
+ "ctx3_rx", "ctx3_tx";
+ firmware-name = "imx/easrc/easrc-imx8mn.bin";
+ fsl,asrc-rate = <8000>;
+ fsl,asrc-format = <2>;
};
diff --git a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
index 5e2801014221..f68d0e0ecfe5 100644
--- a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
@@ -140,21 +140,21 @@ examples:
#include <dt-bindings/reset/imx8mp-reset.h>
xcvr: xcvr@30cc0000 {
- compatible = "fsl,imx8mp-xcvr";
- reg = <0x30cc0000 0x800>,
- <0x30cc0800 0x400>,
- <0x30cc0c00 0x080>,
- <0x30cc0e00 0x080>;
- reg-names = "ram", "regs", "rxfifo", "txfifo";
- interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&audiomix_clk IMX8MP_CLK_AUDIOMIX_EARC_IPG>,
- <&audiomix_clk IMX8MP_CLK_AUDIOMIX_EARC_PHY>,
- <&audiomix_clk IMX8MP_CLK_AUDIOMIX_SPBA2_ROOT>,
- <&audiomix_clk IMX8MP_CLK_AUDIOMIX_AUDPLL_ROOT>;
- clock-names = "ipg", "phy", "spba", "pll_ipg";
- dmas = <&sdma2 30 2 0>, <&sdma2 31 2 0>;
- dma-names = "rx", "tx";
- resets = <&audiomix_reset 0>;
+ compatible = "fsl,imx8mp-xcvr";
+ reg = <0x30cc0000 0x800>,
+ <0x30cc0800 0x400>,
+ <0x30cc0c00 0x080>,
+ <0x30cc0e00 0x080>;
+ reg-names = "ram", "regs", "rxfifo", "txfifo";
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&audiomix_clk IMX8MP_CLK_AUDIOMIX_EARC_IPG>,
+ <&audiomix_clk IMX8MP_CLK_AUDIOMIX_EARC_PHY>,
+ <&audiomix_clk IMX8MP_CLK_AUDIOMIX_SPBA2_ROOT>,
+ <&audiomix_clk IMX8MP_CLK_AUDIOMIX_AUDPLL_ROOT>;
+ clock-names = "ipg", "phy", "spba", "pll_ipg";
+ dmas = <&sdma2 30 2 0>, <&sdma2 31 2 0>;
+ dma-names = "rx", "tx";
+ resets = <&audiomix_reset 0>;
};
diff --git a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
index 76b6f2cf25df..dca617860938 100644
--- a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
@@ -72,19 +72,19 @@ unevaluatedProperties: false
examples:
- |
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- #define KEEM_BAY_PSS_AUX_I2S3
- #define KEEM_BAY_PSS_I2S3
- i2s3: i2s@20140000 {
- compatible = "intel,keembay-i2s";
- #sound-dai-cells = <0>;
- reg = <0x20140000 0x200>, /* I2S registers */
- <0x202a00a4 0x4>; /* I2S gen configuration */
- reg-names = "i2s-regs", "i2s_gen_cfg";
- interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "osc", "apb_clk";
- clocks = <&scmi_clk KEEM_BAY_PSS_AUX_I2S3>, <&scmi_clk KEEM_BAY_PSS_I2S3>;
- dmas = <&axi_dma0 29>, <&axi_dma0 33>;
- dma-names = "tx", "rx";
- };
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #define KEEM_BAY_PSS_AUX_I2S3
+ #define KEEM_BAY_PSS_I2S3
+ i2s@20140000 {
+ compatible = "intel,keembay-i2s";
+ #sound-dai-cells = <0>;
+ reg = <0x20140000 0x200>, /* I2S registers */
+ <0x202a00a4 0x4>; /* I2S gen configuration */
+ reg-names = "i2s-regs", "i2s_gen_cfg";
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "osc", "apb_clk";
+ clocks = <&scmi_clk KEEM_BAY_PSS_AUX_I2S3>, <&scmi_clk KEEM_BAY_PSS_I2S3>;
+ dmas = <&axi_dma0 29>, <&axi_dma0 33>;
+ dma-names = "tx", "rx";
+ };
diff --git a/Documentation/devicetree/bindings/sound/neofidelity,ntp8918.yaml b/Documentation/devicetree/bindings/sound/neofidelity,ntp8918.yaml
index 952768b35902..6946177e391a 100644
--- a/Documentation/devicetree/bindings/sound/neofidelity,ntp8918.yaml
+++ b/Documentation/devicetree/bindings/sound/neofidelity,ntp8918.yaml
@@ -55,16 +55,18 @@ unevaluatedProperties: false
examples:
- |
- #include <dt-bindings/gpio/gpio.h>
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
- audio-codec@2a {
- compatible = "neofidelity,ntp8918";
- #sound-dai-cells = <0>;
- reg = <0x2a>;
- clocks = <&clkc 150>, <&clkc 151>, <&clkc 152>;
- clock-names = "wck", "scl", "bck";
- reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ audio-codec@2a {
+ compatible = "neofidelity,ntp8918";
+ #sound-dai-cells = <0>;
+ reg = <0x2a>;
+ clocks = <&clkc 150>, <&clkc 151>, <&clkc 152>;
+ clock-names = "wck", "scl", "bck";
+ reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
};
- };
diff --git a/Documentation/devicetree/bindings/sound/ti,pcm6240.yaml b/Documentation/devicetree/bindings/sound/ti,pcm6240.yaml
index dd5b08e3d7a1..d89b4255b51c 100644
--- a/Documentation/devicetree/bindings/sound/ti,pcm6240.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,pcm6240.yaml
@@ -159,19 +159,21 @@ additionalProperties: false
examples:
- |
- #include <dt-bindings/gpio/gpio.h>
- i2c {
- /* example for two devices with interrupt support */
- #address-cells = <1>;
- #size-cells = <0>;
- pcm6240: audio-codec@48 {
- compatible = "ti,pcm6240";
- reg = <0x48>, /* primary-device */
- <0x4b>; /* secondary-device */
- #sound-dai-cells = <0>;
- reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
- interrupt-parent = <&gpio1>;
- interrupts = <15>;
- };
- };
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ /* example for two devices with interrupt support */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ audio-codec@48 {
+ compatible = "ti,pcm6240";
+ reg = <0x48>, /* primary-device */
+ <0x4b>; /* secondary-device */
+ #sound-dai-cells = <0>;
+ reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15>;
+ };
+ };
...
diff --git a/Documentation/devicetree/bindings/sound/ti,tas2562.yaml b/Documentation/devicetree/bindings/sound/ti,tas2562.yaml
index 8bc3b0c7531e..3763ca16b91f 100644
--- a/Documentation/devicetree/bindings/sound/ti,tas2562.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,tas2562.yaml
@@ -65,17 +65,19 @@ unevaluatedProperties: false
examples:
- |
- #include <dt-bindings/gpio/gpio.h>
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
- codec: codec@4c {
- compatible = "ti,tas2562";
- reg = <0x4c>;
- #sound-dai-cells = <0>;
- interrupt-parent = <&gpio1>;
- interrupts = <14>;
- shutdown-gpios = <&gpio1 15 0>;
- ti,imon-slot-no = <0>;
- };
- };
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ codec@4c {
+ compatible = "ti,tas2562";
+ reg = <0x4c>;
+ #sound-dai-cells = <0>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <14>;
+ shutdown-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ ti,imon-slot-no = <0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/sound/ti,tas2770.yaml b/Documentation/devicetree/bindings/sound/ti,tas2770.yaml
index 362c2e6154f0..5e7aea43aced 100644
--- a/Documentation/devicetree/bindings/sound/ti,tas2770.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,tas2770.yaml
@@ -69,19 +69,21 @@ unevaluatedProperties: false
examples:
- |
- #include <dt-bindings/gpio/gpio.h>
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
- codec: codec@41 {
- compatible = "ti,tas2770";
- reg = <0x41>;
- #sound-dai-cells = <0>;
- interrupt-parent = <&gpio1>;
- interrupts = <14>;
- reset-gpio = <&gpio1 15 0>;
- shutdown-gpios = <&gpio1 14 0>;
- ti,imon-slot-no = <0>;
- ti,vmon-slot-no = <2>;
- };
- };
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ codec@41 {
+ compatible = "ti,tas2770";
+ reg = <0x41>;
+ #sound-dai-cells = <0>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <14>;
+ reset-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ ti,imon-slot-no = <0>;
+ ti,vmon-slot-no = <2>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
index 976238689249..5ea1cdc593b5 100644
--- a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
@@ -101,22 +101,24 @@ additionalProperties: false
examples:
- |
- #include <dt-bindings/gpio/gpio.h>
- i2c {
- /* example with quad tas2781s, such as tablet or pad device */
- #address-cells = <1>;
- #size-cells = <0>;
- quad_tas2781: tas2781@38 {
- compatible = "ti,tas2781";
- reg = <0x38>, /* Audio slot 0 */
- <0x3a>, /* Audio slot 1 */
- <0x39>, /* Audio slot 2 */
- <0x3b>; /* Audio slot 3 */
+ #include <dt-bindings/gpio/gpio.h>
- #sound-dai-cells = <0>;
- reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
- interrupt-parent = <&gpio1>;
- interrupts = <15>;
- };
- };
+ i2c {
+ /* example with quad tas2781s, such as tablet or pad device */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ audio-codec@38 {
+ compatible = "ti,tas2781";
+ reg = <0x38>, /* Audio slot 0 */
+ <0x3a>, /* Audio slot 1 */
+ <0x39>, /* Audio slot 2 */
+ <0x3b>; /* Audio slot 3 */
+
+ #sound-dai-cells = <0>;
+ reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15>;
+ };
+ };
...
diff --git a/Documentation/devicetree/bindings/sound/ti,tas27xx.yaml b/Documentation/devicetree/bindings/sound/ti,tas27xx.yaml
index 530bc3937847..5447482179c1 100644
--- a/Documentation/devicetree/bindings/sound/ti,tas27xx.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,tas27xx.yaml
@@ -62,21 +62,23 @@ unevaluatedProperties: false
examples:
- |
- #include <dt-bindings/gpio/gpio.h>
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
- codec: codec@38 {
- compatible = "ti,tas2764";
- reg = <0x38>;
- #sound-dai-cells = <0>;
- interrupt-parent = <&gpio1>;
- interrupts = <14>;
- reset-gpios = <&gpio1 15 0>;
- shutdown-gpios = <&gpio1 15 0>;
- ti,imon-slot-no = <0>;
- ti,vmon-slot-no = <2>;
- };
- };
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ codec@38 {
+ compatible = "ti,tas2764";
+ reg = <0x38>;
+ #sound-dai-cells = <0>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <14>;
+ reset-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ ti,imon-slot-no = <0>;
+ ti,vmon-slot-no = <2>;
+ };
+ };
...
diff --git a/Documentation/devicetree/bindings/sound/ti,tas57xx.yaml b/Documentation/devicetree/bindings/sound/ti,tas57xx.yaml
index 2f917238db95..74f7d02b424b 100644
--- a/Documentation/devicetree/bindings/sound/ti,tas57xx.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,tas57xx.yaml
@@ -112,22 +112,24 @@ unevaluatedProperties: false
examples:
- |
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
+ #include <dt-bindings/gpio/gpio.h>
- codec@2a {
- compatible = "ti,tas5717";
- reg = <0x2a>;
- #sound-dai-cells = <0>;
- reset-gpios = <&gpio1 15 0>;
- pdn-gpios = <&gpio1 15 0>;
- AVDD-supply = <&avdd_supply>;
- DVDD-supply = <&dvdd_supply>;
- HPVDD-supply = <&hpvdd_supply>;
- PVDD_AB-supply = <&pvdd_ab_supply>;
- PVDD_CD-supply = <&pvdd_cd_supply>;
- };
- };
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ codec@2a {
+ compatible = "ti,tas5717";
+ reg = <0x2a>;
+ #sound-dai-cells = <0>;
+ reset-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ pdn-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ AVDD-supply = <&avdd_supply>;
+ DVDD-supply = <&dvdd_supply>;
+ HPVDD-supply = <&hpvdd_supply>;
+ PVDD_AB-supply = <&pvdd_ab_supply>;
+ PVDD_CD-supply = <&pvdd_cd_supply>;
+ };
+ };
...
--
2.43.0
