Ethernet boot requires CPSW nodes to be present starting from R5 SPL
stage. Add bootph-all property to necessary nodes for CPSW to enable those
nodes during SPL stage along with later boot stages for AM62p-SK and
J722s.
Signed-off-by: Chintan Vankar <c-vankar@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi | 3 +++
arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 2 ++
arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 3 +++
3 files changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
index 6e3beb5c2e01..96ddc5c17991 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
@@ -50,6 +50,7 @@ phy_gmii_sel: phy@4044 {
compatible = "ti,am654-phy-gmii-sel";
reg = <0x4044 0x8>;
#phy-cells = <1>;
+ bootph-all;
};
epwm_tbclk: clock-controller@4130 {
@@ -714,6 +715,7 @@ ethernet-ports {
#size-cells = <0>;
cpsw_port1: port@1 {
+ bootph-all;
reg = <1>;
ti,mac-only;
label = "port1";
@@ -742,6 +744,7 @@ cpsw3g_mdio: mdio@f00 {
clock-names = "fck";
bus_freq = <1000000>;
status = "disabled";
+ bootph-all;
};
cpts@3d000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index ad71d2f27f53..28b08eb79da3 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -226,6 +226,7 @@ main_mdio1_pins_default: main-mdio1-default-pins {
AM62PX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (F17) MDIO0_MDC */
AM62PX_IOPAD(0x015c, PIN_INPUT, 0) /* (F16) MDIO0_MDIO */
>;
+ bootph-all;
};
main_mmc1_pins_default: main-mmc1-default-pins {
@@ -495,6 +496,7 @@ &cpsw3g_mdio {
cpsw3g_phy0: ethernet-phy@0 {
reg = <0>;
+ bootph-all;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,min-output-impedance;
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index 796287c76b69..1785c9848664 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -303,6 +303,7 @@ mdio_pins_default: mdio-default-pins {
J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */
J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */
>;
+ bootph-all;
};
ospi0_pins_default: ospi0-default-pins {
@@ -337,6 +338,7 @@ J722S_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AF24) RGMII1_TD3 */
J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */
J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */
>;
+ bootph-all;
};
main_usb1_pins_default: main-usb1-default-pins {
@@ -374,6 +376,7 @@ &cpsw3g_mdio {
cpsw3g_phy0: ethernet-phy@0 {
reg = <0>;
+ bootph-all;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,min-output-impedance;
--
2.34.1
