Hi Kory, please, split this patch set. Some of them can be already taken. The upper limit for the patch set is 15 patches. Regards, Oleksij On Fri, Jan 03, 2025 at 10:12:49PM +0100, Kory Maincent wrote: > From: Kory Maincent (Dent Project) <kory.maincent@xxxxxxxxxxx> > > This series brings support for budget evaluation strategy in the PSE > subsystem. PSE controllers can set priorities to decide which ports should > be turned off in case of special events like over-current. > > I have added regulator maintainers to have their opinion on adding power > budget regulator constraint see patches 17 and 18. > There are also a core regulator change along the way patch 16. > I suppose I will need to merge them through the regulator tree. > Will it be possible to create an immutable tag to have this PSE series > based on them? > > This patch series adds support for two budget evaluation strategy. > 1. Static Method: > > This method involves distributing power based on PD classification. > It’s straightforward and stable, the PSE core keeping track of the > budget and subtracting the power requested by each PD’s class. > > Advantages: Every PD gets its promised power at any time, which > guarantees reliability. > > Disadvantages: PD classification steps are large, meaning devices > request much more power than they actually need. As a result, the power > supply may only operate at, say, 50% capacity, which is inefficient and > wastes money. > > 2. Dynamic Method: > > To address the inefficiencies of the static method, vendors like > Microchip have introduced dynamic power budgeting, as seen in the > PD692x0 firmware. This method monitors the current consumption per port > and subtracts it from the available power budget. When the budget is > exceeded, lower-priority ports are shut down. > > Advantages: This method optimizes resource utilization, saving costs. > > Disadvantages: Low-priority devices may experience instability. > > The UAPI allows adding support for software port priority mode managed from > userspace later if needed. > > The patch series is based on this fix merged in net: > https://lore.kernel.org/netdev/20241220170400.291705-1-kory.maincent@xxxxxxxxxxx/ > > Several Reviewed-by have been removed due to the changes. > > Thanks Oleksij for your pointers. > > Patches 1-9: Cosmetics. > Patch 10: Adds support for last supported features in the TPS23881 drivers. > Patches 11,12: Add support for PSE index in PSE core and ethtool. > Patches 12-14: Add support for interrupt event report in PSE core, ethtool > and ethtool specs. > Patch 15: Adds support for interrupt and event report in TPS23881 driver. > Patch 16: Fix regulator resolve supply > Patches 17,18: Add support for power budget in regulator framework. > Patch 19: Cosmetic. > Patches 20,21: Add support for PSE power domain in PSE core and ethtool. > Patches 22,23: Add support for port priority in PSE core, ethtool and > ethtool specs. > Patches 24,25: Add support for port priority in PD692x0 drivers. > Patches 26,27: Add support for port priority in TPS23881 drivers. > > Signed-off-by: Kory Maincent <kory.maincent@xxxxxxxxxxx> > --- > Changes in v4: > - Remove disconnection policy. > - Rename port priority mode to budget evaluation strategy. > - Add cosmetic changes in PSE core. > - Add support for port priority in PD692x0 driver. > - Link to v3: https://lore.kernel.org/r/20241121-feature_poe_port_prio-v3-0-83299fa6967c@xxxxxxxxxxx > > Changes in v3: > - Move power budget to regulator core. > - Add disconnection policies with PIs using the same priority. > - Several fixes on the TPS23881 drivers. > - Several new cosmetic patches. > - Link to v2: https://lore.kernel.org/r/20241030-feature_poe_port_prio-v2-0-9559622ee47a@xxxxxxxxxxx > > Changes in v2: > - Rethink the port priority management. > - Add PSE id. > - Add support for PSE power domains. > - Add get power budget regulator constraint. > - Link to v1: https://lore.kernel.org/r/20241002-feature_poe_port_prio-v1-0-787054f74ed5@xxxxxxxxxxx > > --- > Kory Maincent (27): > net: pse-pd: Remove unused pse_ethtool_get_pw_limit function declaration > net: pse-pd: Avoid setting max_uA in regulator constraints > net: pse-pd: Add power limit check > net: pse-pd: tps23881: Simplify function returns by removing redundant checks > net: pse-pd: tps23881: Use helpers to calculate bit offset for a channel > net: pse-pd: tps23881: Add missing configuration register after disable > net: pse-pd: Use power limit at driver side instead of current limit > net: pse-pd: Split ethtool_get_status into multiple callbacks > net: pse-pd: Remove is_enabled callback from drivers > net: pse-pd: tps23881: Add support for power limit and measurement features > net: pse-pd: Add support for PSE device index > net: ethtool: Add support for new PSE device index description > net: ethtool: Add support for ethnl_info_init_ntf helper function > net: pse-pd: Add support for reporting events > net: pse-pd: tps23881: Add support for PSE events and interrupts > regulator: core: Resolve supply using of_node from regulator_config > regulator: Add support for power budget description > regulator: dt-bindings: Add regulator-power-budget property > net: pse-pd: Fix missing PI of_node description > net: pse-pd: Add support for PSE power domains > net: ethtool: Add support for new power domains index description > net: pse-pd: Add support for getting budget evaluation strategies > net: ethtool: Add PSE new budget evaluation strategy support feature > net: pse-pd: pd692x0: Add support for PSE PI priority feature > dt-bindings: net: pse-pd: microchip,pd692x0: Add manager regulator supply > net: pse-pd: tps23881: Add support for static port priority feature > dt-bindings: net: pse-pd: ti,tps23881: Add interrupt description > > .../bindings/net/pse-pd/microchip,pd692x0.yaml | 12 +- > .../bindings/net/pse-pd/ti,tps23881.yaml | 6 + > .../devicetree/bindings/regulator/regulator.yaml | 5 + > Documentation/netlink/specs/ethtool.yaml | 52 + > Documentation/networking/ethtool-netlink.rst | 94 ++ > drivers/net/mdio/fwnode_mdio.c | 26 +- > drivers/net/pse-pd/pd692x0.c | 423 ++++++-- > drivers/net/pse-pd/pse_core.c | 1029 ++++++++++++++++++-- > drivers/net/pse-pd/pse_regulator.c | 23 +- > drivers/net/pse-pd/tps23881.c | 799 +++++++++++++-- > drivers/regulator/core.c | 128 ++- > drivers/regulator/of_regulator.c | 3 + > include/linux/ethtool.h | 47 + > include/linux/ethtool_netlink.h | 9 + > include/linux/pse-pd/pse.h | 171 +++- > include/linux/regulator/consumer.h | 21 + > include/linux/regulator/driver.h | 2 + > include/linux/regulator/machine.h | 2 + > include/uapi/linux/ethtool.h | 54 + > include/uapi/linux/ethtool_netlink.h | 1 - > include/uapi/linux/ethtool_netlink_generated.h | 15 + > net/ethtool/common.c | 12 + > net/ethtool/common.h | 2 + > net/ethtool/netlink.c | 7 +- > net/ethtool/netlink.h | 2 + > net/ethtool/pse-pd.c | 98 +- > net/ethtool/strset.c | 5 + > 27 files changed, 2698 insertions(+), 350 deletions(-) > --- > base-commit: 2e22297376fe1aa562799c774c3baac9b6db238b > change-id: 20240913-feature_poe_port_prio-a51aed7332ec > > Best regards, > -- > Köry Maincent, Bootlin > Embedded Linux and kernel engineering > https://bootlin.com > > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
