This series adds dt-bindings and dts for the NetCube Systems Kumquat board. Changes in v2: Fix the devicetrees according to the "dt-schema" and "make dtbs_check W=1" Fix the License of the devicetree as requested Create a cover letter for the patch series Changes in v3: Disable rtc inside the SoC again, as the rtc does not work Add the gpio-reserved-ranges property to the pinctrl bindings Reorder the nodes in the devicetree to match the order of the nodes in the sun8i-v3s.dtsi file Signed-off-by: Lukas Schmid <lukas.schmid@xxxxxxxxxx> --- Lukas Schmid (4): dt-bindings: vendor-prefixes: Add NetCube Systems Austria name dt-bindings: arm: sunxi: Add NetCube Systems Kumquat board dt-bindings: pinctrl: sunxi: Add gpio-reserved-ranges property ARM: dts: sunxi: add support for NetCube Systems Kumquat .../devicetree/bindings/arm/sunxi.yaml | 5 + .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 5 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm/boot/dts/allwinner/Makefile | 2 + .../allwinner/sun8i-v3s-netcube-kumquat.dts | 290 ++++++++++++++++++ arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi | 6 + 6 files changed, 310 insertions(+) create mode 100644 arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts -- 2.47.1
