SolidRun HummingBoard-T has two options for M.2 connector, supporting either PCI-E or USB-3.1 Gen 1 - depending on configuration of a mux on the serdes lane. The required configurations in device-tree were modeled as overlays. The USB-3.1 overlay uses /delete-property/ to unset a boolean property on the usb controller limiting it to USB-2.0 by default. Overlays can not delete a property from the base dtb, therefore this overlay is at this time useless. Convert both overlays into full dts by including the base board dts. While the pcie overlay was functional, both are converted for a consistent user experience when selecting between the two mutually exclusive configurations. Reported-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> Closes: https://lore.kernel.org/linux-devicetree/CAMuHMdXTgpTnJ9U7egC2XjFXXNZ5uiY1O+WxNd6LPJW5Rs5KTw@xxxxxxxxxxxxxx Fixes: bbef42084cc1 ("arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3") Signed-off-by: Josua Mayer <josua@xxxxxxxxxxxxx> --- Changes in v2: - rebased on v6.13-rc1 - Link to v1: https://lore.kernel.org/r/20241101-am64-hb-fix-overlay-v1-1-080b98b057b6@xxxxxxxxxxxxx --- arch/arm64/boot/dts/ti/Makefile | 4 ---- ...gboard-t-pcie.dtso => k3-am642-hummingboard-t-pcie.dts} | 14 ++++++++------ ...gboard-t-usb3.dtso => k3-am642-hummingboard-t-usb3.dts} | 13 ++++++++----- 3 files changed, 16 insertions(+), 15 deletions(-) diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index f71360f14f233cc8c60860c0e700d4791fb6f95c..3450f0751cab176a8f63c4faba4f736c53b62007 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -42,10 +42,6 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-imx219.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-hdmi-audio.dtbo # Boards with AM64x SoC -k3-am642-hummingboard-t-pcie-dtbs := \ - k3-am642-hummingboard-t.dtb k3-am642-hummingboard-t-pcie.dtbo -k3-am642-hummingboard-t-usb3-dtbs := \ - k3-am642-hummingboard-t.dtb k3-am642-hummingboard-t-usb3.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac-mii.dtbo diff --git a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dtso b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dts similarity index 78% rename from arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dtso rename to arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dts index bd9a5caf20da5b7f11266575f69f0f5dcc1a47ae..023b2a6aaa56689f712a6c1ede6ba427d746fe34 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dtso +++ b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dts @@ -2,17 +2,19 @@ /* * Copyright (C) 2023 Josua Mayer <josua@xxxxxxxxxxxxx> * - * Overlay for SolidRun AM642 HummingBoard-T to enable PCI-E. + * DTS for SolidRun AM642 HummingBoard-T, + * running on Cortex A53, with PCI-E. + * */ -/dts-v1/; -/plugin/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/phy/phy.h> +#include "k3-am642-hummingboard-t.dts" #include "k3-serdes.h" +/ { + model = "SolidRun AM642 HummingBoard-T with PCI-E"; +}; + &pcie0_rc { pinctrl-names = "default"; pinctrl-0 = <&pcie0_default_pins>; diff --git a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dtso b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dts similarity index 74% rename from arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dtso rename to arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dts index ffcc3bd3c7bc5d47ce9926a95a13af3f61182a2b..ee9bd618f3701047be4ac7502cb70e7d3589ff5d 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dtso +++ b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dts @@ -2,16 +2,19 @@ /* * Copyright (C) 2023 Josua Mayer <josua@xxxxxxxxxxxxx> * - * Overlay for SolidRun AM642 HummingBoard-T to enable USB-3.1. + * DTS for SolidRun AM642 HummingBoard-T, + * running on Cortex A53, with USB-3.1 Gen 1. + * */ -/dts-v1/; -/plugin/; - -#include <dt-bindings/phy/phy.h> +#include "k3-am642-hummingboard-t.dts" #include "k3-serdes.h" +/ { + model = "SolidRun AM642 HummingBoard-T with USB-3.1 Gen 1"; +}; + &serdes0 { #address-cells = <1>; #size-cells = <0>; --- base-commit: 40384c840ea1944d7c5a392e8975ed088ecf0b37 change-id: 20241101-am64-hb-fix-overlay-5c3074974008 Best regards, -- Josua Mayer <josua@xxxxxxxxxxxxx>
