Re: [PATCH v5 5/6] arm64: dts: qcom: Add support for QCS9075 Ride & Ride-r3

[Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>]

On 29.12.2024 4:23 PM, Wasim Nazir wrote:
> Add device tree support for QCS9075 Ride & Ride-r3 boards.
> 
> QCS9075 lacks the safety monitoring features of Safety-Island (SAIL)
> subsystem which is available in QCS9100, and it affects thermal
> management.
> 
> Also, between ride and ride-r3 ethernet phy is different.
> Ride uses 1G ethernet phy while ride-r3 uses 2.5G ethernet phy.
> 
> Signed-off-by: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
> ---

+ Andrew

IIUC we have a similar case to

https://lore.kernel.org/linux-arm-msm/cbd696c0-3b25-438b-a279-a4263308323a@xxxxxxx/

here in the first file changed, please see below and let me know if
the rest makes sense for the networking part

Konrad

>  arch/arm64/boot/dts/qcom/Makefile            |  2 +
>  arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts | 46 ++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/qcs9075-ride.dts    | 46 ++++++++++++++++++++
>  3 files changed, 94 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/qcs9075-ride.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 78613a1bd34a..41cb2bbd3472 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -118,6 +118,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs8300-ride.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs9075-rb8.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= qcs9075-ride.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= qcs9075-ride-r3.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride-r3.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts b/arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts
> new file mode 100644
> index 000000000000..d9a8956d3a76
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts
> @@ -0,0 +1,46 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +/dts-v1/;
> +
> +#include "sa8775p-ride.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. QCS9075 Ride Rev3";
> +	compatible = "qcom,qcs9075-ride-r3", "qcom,qcs9075", "qcom,sa8775p";
> +};
> +
> +&ethernet0 {
> +	phy-mode = "2500base-x";
> +};
> +
> +&ethernet1 {
> +	phy-mode = "2500base-x";
> +};
> +
> +&mdio {
> +	compatible = "snps,dwmac-mdio";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	sgmii_phy0: phy@8 {
> +		compatible = "ethernet-phy-id31c3.1c33";
> +		reg = <0x8>;
> +		device_type = "ethernet-phy";
> +		interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
> +		reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
> +		reset-assert-us = <11000>;
> +		reset-deassert-us = <70000>;
> +	};
> +
> +	sgmii_phy1: phy@0 {
> +		compatible = "ethernet-phy-id31c3.1c33";
> +		reg = <0x0>;
> +		device_type = "ethernet-phy";
> +		interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
> +		reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
> +		reset-assert-us = <11000>;
> +		reset-deassert-us = <70000>;
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/qcom/qcs9075-ride.dts b/arch/arm64/boot/dts/qcom/qcs9075-ride.dts
> new file mode 100644
> index 000000000000..3b524359a72d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcs9075-ride.dts
> @@ -0,0 +1,46 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +/dts-v1/;
> +
> +#include "sa8775p-ride.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. QCS9075 Ride";
> +	compatible = "qcom,qcs9075-ride", "qcom,qcs9075", "qcom,sa8775p";
> +};
> +
> +&ethernet0 {
> +	phy-mode = "sgmii";
> +};
> +
> +&ethernet1 {
> +	phy-mode = "sgmii";
> +};
> +
> +&mdio {
> +	compatible = "snps,dwmac-mdio";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	sgmii_phy0: phy@8 {
> +		compatible = "ethernet-phy-id0141.0dd4";
> +		reg = <0x8>;
> +		device_type = "ethernet-phy";
> +		interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
> +		reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
> +		reset-assert-us = <11000>;
> +		reset-deassert-us = <70000>;
> +	};
> +
> +	sgmii_phy1: phy@a {
> +		compatible = "ethernet-phy-id0141.0dd4";
> +		reg = <0xa>;
> +		device_type = "ethernet-phy";
> +		interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
> +		reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
> +		reset-assert-us = <11000>;
> +		reset-deassert-us = <70000>;
> +	};
> +};
> --
> 2.47.0
>