Like on j7200, pinctrl contexts shall be saved and restored during suspend-to-ram. So use ti,j7200-padconf compatible. Signed-off-by: Thomas Richard <thomas.richard@xxxxxxxxxxx> --- Second iteration, the series was just rebased to v6.13-rc5. --- Changes in v2: - Rebased to v6.13-rc5 - Link to v1: https://lore.kernel.org/r/20241113-j784s4-s2r-pinctrl-v1-1-19aeb62739bc@xxxxxxxxxxx --- arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi | 6 +++--- .../boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi | 12 ++++++------ 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi index 7721852c1f68..026f959e68a2 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi @@ -224,7 +224,7 @@ main_gpio_intr: interrupt-controller@a00000 { }; main_pmx0: pinctrl@11c000 { - compatible = "pinctrl-single"; + compatible = "ti,j7200-padconf", "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x00 0x11c000 0x00 0x120>; #pinctrl-cells = <1>; @@ -234,7 +234,7 @@ main_pmx0: pinctrl@11c000 { /* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */ main_timerio_input: pinctrl@104200 { - compatible = "pinctrl-single"; + compatible = "ti,j7200-padconf", "pinctrl-single"; reg = <0x00 0x104200 0x00 0x50>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; @@ -243,7 +243,7 @@ main_timerio_input: pinctrl@104200 { /* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */ main_timerio_output: pinctrl@104280 { - compatible = "pinctrl-single"; + compatible = "ti,j7200-padconf", "pinctrl-single"; reg = <0x00 0x104280 0x00 0x20>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi index 9638130caece..52e2965a3bf5 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi @@ -76,7 +76,7 @@ mcu_ram: sram@41c00000 { }; wkup_pmx0: pinctrl@4301c000 { - compatible = "pinctrl-single"; + compatible = "ti,j7200-padconf", "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x00 0x4301c000 0x00 0x034>; #pinctrl-cells = <1>; @@ -85,7 +85,7 @@ wkup_pmx0: pinctrl@4301c000 { }; wkup_pmx1: pinctrl@4301c038 { - compatible = "pinctrl-single"; + compatible = "ti,j7200-padconf", "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x00 0x4301c038 0x00 0x02c>; #pinctrl-cells = <1>; @@ -94,7 +94,7 @@ wkup_pmx1: pinctrl@4301c038 { }; wkup_pmx2: pinctrl@4301c068 { - compatible = "pinctrl-single"; + compatible = "ti,j7200-padconf", "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x00 0x4301c068 0x00 0x120>; #pinctrl-cells = <1>; @@ -103,7 +103,7 @@ wkup_pmx2: pinctrl@4301c068 { }; wkup_pmx3: pinctrl@4301c190 { - compatible = "pinctrl-single"; + compatible = "ti,j7200-padconf", "pinctrl-single"; /* Proxy 0 addressing */ reg = <0x00 0x4301c190 0x00 0x004>; #pinctrl-cells = <1>; @@ -125,7 +125,7 @@ wkup_gpio_intr: interrupt-controller@42200000 { /* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */ mcu_timerio_input: pinctrl@40f04200 { - compatible = "pinctrl-single"; + compatible = "ti,j7200-padconf", "pinctrl-single"; reg = <0x00 0x40f04200 0x00 0x28>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; @@ -136,7 +136,7 @@ mcu_timerio_input: pinctrl@40f04200 { /* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */ mcu_timerio_output: pinctrl@40f04280 { - compatible = "pinctrl-single"; + compatible = "ti,j7200-padconf", "pinctrl-single"; reg = <0x00 0x40f04280 0x00 0x28>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; --- base-commit: 0fcd4792246bb4fd490af35de8d914c33ccfa65f change-id: 20241108-j784s4-s2r-pinctrl-643e1ac2014c Best regards, -- Thomas Richard <thomas.richard@xxxxxxxxxxx>
