Re: [PATCH v7 1/5] dt-bindings: clock: qcom: Add CMN PLL clock controller for IPQ SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Dec 20, 2024 at 09:22:42PM +0800, Luo Jie wrote:
> The CMN PLL controller provides clocks to networking hardware blocks
> and to GCC on Qualcomm IPQ9574 SoC. It receives input clock from the
> on-chip Wi-Fi, and produces output clocks at fixed rates. These output
> rates are predetermined, and are unrelated to the input clock rate.
> The primary purpose of CMN PLL is to supply clocks to the networking
> hardware such as PPE (packet process engine), PCS and the externally
> connected switch or PHY device. The CMN PLL block also outputs fixed
> rate clocks to GCC, such as 24 MHZ as XO clock and 32 KHZ as sleep
> clock supplied to GCC.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> Signed-off-by: Luo Jie <quic_luoj@xxxxxxxxxxx>
> ---
>  .../bindings/clock/qcom,ipq9574-cmn-pll.yaml       | 85 ++++++++++++++++++++++
>  include/dt-bindings/clock/qcom,ipq-cmn-pll.h       | 22 ++++++
>  2 files changed, 107 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq9574-cmn-pll.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq9574-cmn-pll.yaml
> new file mode 100644
> index 000000000000..db8a3ee56067
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/qcom,ipq9574-cmn-pll.yaml
> @@ -0,0 +1,85 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/qcom,ipq9574-cmn-pll.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm CMN PLL Clock Controller on IPQ SoC
> +
> +maintainers:
> +  - Bjorn Andersson <andersson@xxxxxxxxxx>
> +  - Luo Jie <quic_luoj@xxxxxxxxxxx>
> +
> +description:
> +  The CMN (or common) PLL clock controller expects a reference
> +  input clock. This reference clock is from the on-board Wi-Fi.
> +  The CMN PLL supplies a number of fixed rate output clocks to
> +  the devices providing networking functions and to GCC. These
> +  networking hardware include PPE (packet process engine), PCS
> +  and the externally connected switch or PHY devices. The CMN
> +  PLL block also outputs fixed rate clocks to GCC. The PLL's
> +  primary function is to enable fixed rate output clocks for
> +  networking hardware functions used with the IPQ SoC.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,ipq9574-cmn-pll
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: The reference clock. The supported clock rates include
> +          25000000, 31250000, 40000000, 48000000, 50000000 and 96000000 HZ.
> +      - description: The AHB clock
> +      - description: The SYS clock
> +    description:
> +      The reference clock is the source clock of CMN PLL, which is from the
> +      Wi-Fi. The AHB and SYS clocks must be enabled to access CMN PLL
> +      clock registers.
> +
> +  clock-names:
> +    items:
> +      - const: ref
> +      - const: ahb
> +      - const: sys
> +
> +  "#clock-cells":
> +    const: 1
> +
> +  assigned-clocks:

Drop

> +    maxItems: 1
> +
> +  assigned-clock-rates-u64:
> +    maxItems: 1

These wasn't here when you received review. Adding new properties always
invalidates review.

No, drop them.


> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - "#clock-cells"
> +  - assigned-clocks

Drop

> +  - assigned-clock-rates-u64

Drop... or explain

Drop all review tags after making significant changes like that.

Best regards,
Krzysztof





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux