On 12/19/2024 7:17 PM, Frank Li wrote:
On Thu, Dec 19, 2024 at 03:10:26PM +0200, Ciprian Costea wrote:From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx> On both 'S32G2' and 'S32G3' SoCs there are five i2c controllers available (i2c0-i2c4). Specific S32G2/S32G3 based board 'i2c' dts device support will be added in further commits. Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx> --- arch/arm64/boot/dts/freescale/s32g2.dtsi | 45 +++++++++++++++++++++ arch/arm64/boot/dts/freescale/s32g3.dtsi | 50 ++++++++++++++++++++++++ 2 files changed, 95 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi index 7be430b78c83..0e6c847ab0c3 100644 --- a/arch/arm64/boot/dts/freescale/s32g2.dtsi +++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi @@ -333,6 +333,33 @@ uart1: serial@401cc000 { status = "disabled"; }; + i2c0: i2c@401e4000 { + compatible = "nxp,s32g2-i2c"; + reg = <0x401e4000 0x1000>;Need add common part #address-cell and #size-cell, which all are the same for all I2C. Frank
Hello Frank, Ok, I will update accordingly in V4. Best Regards, Ciprian
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 40>; + clock-names = "ipg"; + status = "disabled"; + }; + + i2c1: i2c@401e8000 { + compatible = "nxp,s32g2-i2c"; + reg = <0x401e8000 0x1000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 40>; + clock-names = "ipg"; + status = "disabled"; + }; + + i2c2: i2c@401ec000 { + compatible = "nxp,s32g2-i2c"; + reg = <0x401ec000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 40>; + clock-names = "ipg"; + status = "disabled"; + }; + uart2: serial@402bc000 { compatible = "nxp,s32g2-linflexuart", "fsl,s32v234-linflexuart"; @@ -341,6 +368,24 @@ uart2: serial@402bc000 { status = "disabled"; }; + i2c3: i2c@402d8000 { + compatible = "nxp,s32g2-i2c"; + reg = <0x402d8000 0x1000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 40>; + clock-names = "ipg"; + status = "disabled"; + }; + + i2c4: i2c@402dc000 { + compatible = "nxp,s32g2-i2c"; + reg = <0x402dc000 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 40>; + clock-names = "ipg"; + status = "disabled"; + }; + usdhc0: mmc@402f0000 { compatible = "nxp,s32g2-usdhc"; reg = <0x402f0000 0x1000>; diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi index 6c572ffe37ca..666e4029e588 100644 --- a/arch/arm64/boot/dts/freescale/s32g3.dtsi +++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi @@ -390,6 +390,36 @@ uart1: serial@401cc000 { status = "disabled"; }; + i2c0: i2c@401e4000 { + compatible = "nxp,s32g3-i2c", + "nxp,s32g2-i2c"; + reg = <0x401e4000 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 40>; + clock-names = "ipg"; + status = "disabled"; + }; + + i2c1: i2c@401e8000 { + compatible = "nxp,s32g3-i2c", + "nxp,s32g2-i2c"; + reg = <0x401e8000 0x1000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 40>; + clock-names = "ipg"; + status = "disabled"; + }; + + i2c2: i2c@401ec000 { + compatible = "nxp,s32g3-i2c", + "nxp,s32g2-i2c"; + reg = <0x401ec000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 40>; + clock-names = "ipg"; + status = "disabled"; + }; + uart2: serial@402bc000 { compatible = "nxp,s32g3-linflexuart", "fsl,s32v234-linflexuart"; @@ -398,6 +428,26 @@ uart2: serial@402bc000 { status = "disabled"; }; + i2c3: i2c@402d8000 { + compatible = "nxp,s32g3-i2c", + "nxp,s32g2-i2c"; + reg = <0x402d8000 0x1000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 40>; + clock-names = "ipg"; + status = "disabled"; + }; + + i2c4: i2c@402dc000 { + compatible = "nxp,s32g3-i2c", + "nxp,s32g2-i2c"; + reg = <0x402dc000 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 40>; + clock-names = "ipg"; + status = "disabled"; + }; + usdhc0: mmc@402f0000 { compatible = "nxp,s32g3-usdhc", "nxp,s32g2-usdhc"; -- 2.45.2
