Re: [PATCH v3 1/4] arm64: dts: s32g: add 'I2C' common board support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 19, 2024 at 03:10:26PM +0200, Ciprian Costea wrote:
> From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
>
> On both 'S32G2' and 'S32G3' SoCs there are five i2c controllers available
> (i2c0-i2c4). Specific S32G2/S32G3 based board 'i2c' dts device support
> will be added in further commits.
>
> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/freescale/s32g2.dtsi | 45 +++++++++++++++++++++
>  arch/arm64/boot/dts/freescale/s32g3.dtsi | 50 ++++++++++++++++++++++++
>  2 files changed, 95 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
> index 7be430b78c83..0e6c847ab0c3 100644
> --- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
> +++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
> @@ -333,6 +333,33 @@ uart1: serial@401cc000 {
>  			status = "disabled";
>  		};
>
> +		i2c0: i2c@401e4000 {
> +			compatible = "nxp,s32g2-i2c";
> +			reg = <0x401e4000 0x1000>;

Need add common part #address-cell and #size-cell, which all are the same
for all I2C.

Frank

> +			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clks 40>;
> +			clock-names = "ipg";
> +			status = "disabled";
> +		};
> +
> +		i2c1: i2c@401e8000 {
> +			compatible = "nxp,s32g2-i2c";
> +			reg = <0x401e8000 0x1000>;
> +			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clks 40>;
> +			clock-names = "ipg";
> +			status = "disabled";
> +		};
> +
> +		i2c2: i2c@401ec000 {
> +			compatible = "nxp,s32g2-i2c";
> +			reg = <0x401ec000 0x1000>;
> +			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clks 40>;
> +			clock-names = "ipg";
> +			status = "disabled";
> +		};
> +
>  		uart2: serial@402bc000 {
>  			compatible = "nxp,s32g2-linflexuart",
>  				     "fsl,s32v234-linflexuart";
> @@ -341,6 +368,24 @@ uart2: serial@402bc000 {
>  			status = "disabled";
>  		};
>
> +		i2c3: i2c@402d8000 {
> +			compatible = "nxp,s32g2-i2c";
> +			reg = <0x402d8000 0x1000>;
> +			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clks 40>;
> +			clock-names = "ipg";
> +			status = "disabled";
> +		};
> +
> +		i2c4: i2c@402dc000 {
> +			compatible = "nxp,s32g2-i2c";
> +			reg = <0x402dc000 0x1000>;
> +			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clks 40>;
> +			clock-names = "ipg";
> +			status = "disabled";
> +		};
> +
>  		usdhc0: mmc@402f0000 {
>  			compatible = "nxp,s32g2-usdhc";
>  			reg = <0x402f0000 0x1000>;
> diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi
> index 6c572ffe37ca..666e4029e588 100644
> --- a/arch/arm64/boot/dts/freescale/s32g3.dtsi
> +++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi
> @@ -390,6 +390,36 @@ uart1: serial@401cc000 {
>  			status = "disabled";
>  		};
>
> +		i2c0: i2c@401e4000 {
> +			compatible = "nxp,s32g3-i2c",
> +				     "nxp,s32g2-i2c";
> +			reg = <0x401e4000 0x1000>;
> +			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clks 40>;
> +			clock-names = "ipg";
> +			status = "disabled";
> +		};
> +
> +		i2c1: i2c@401e8000 {
> +			compatible = "nxp,s32g3-i2c",
> +				     "nxp,s32g2-i2c";
> +			reg = <0x401e8000 0x1000>;
> +			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clks 40>;
> +			clock-names = "ipg";
> +			status = "disabled";
> +		};
> +
> +		i2c2: i2c@401ec000 {
> +			compatible = "nxp,s32g3-i2c",
> +				     "nxp,s32g2-i2c";
> +			reg = <0x401ec000 0x1000>;
> +			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clks 40>;
> +			clock-names = "ipg";
> +			status = "disabled";
> +		};
> +
>  		uart2: serial@402bc000 {
>  			compatible = "nxp,s32g3-linflexuart",
>  				     "fsl,s32v234-linflexuart";
> @@ -398,6 +428,26 @@ uart2: serial@402bc000 {
>  			status = "disabled";
>  		};
>
> +		i2c3: i2c@402d8000 {
> +			compatible = "nxp,s32g3-i2c",
> +				     "nxp,s32g2-i2c";
> +			reg = <0x402d8000 0x1000>;
> +			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clks 40>;
> +			clock-names = "ipg";
> +			status = "disabled";
> +		};
> +
> +		i2c4: i2c@402dc000 {
> +			compatible = "nxp,s32g3-i2c",
> +				     "nxp,s32g2-i2c";
> +			reg = <0x402dc000 0x1000>;
> +			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clks 40>;
> +			clock-names = "ipg";
> +			status = "disabled";
> +		};
> +
>  		usdhc0: mmc@402f0000 {
>  			compatible = "nxp,s32g3-usdhc",
>  				     "nxp,s32g2-usdhc";
> --
> 2.45.2
>




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux