From: Marek Vasut <marex@xxxxxxx>
Sent: Friday, December 13, 2024 11:36 PM
> Swap USART3 and UART8 aliases on STM32MP15xx DHCOM SoM,
> make sure UART8 is listed first, USART3 second, because
> the UART8 is labeled as UART2 on the SoM pinout, while
> USART3 is labeled as UART3 on the SoM pinout.
>
> Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2
> board")
> Signed-off-by: Marek Vasut <marex@xxxxxxx>
> ---
> Cc: Alexandre Torgue <alexandre.torgue@xxxxxxxxxxx>
> Cc: Christoph Niedermaier <cniedermaier@xxxxxxxxxxxxxxxxxx>
> Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
> Cc: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
> Cc: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
> Cc: Rob Herring <robh@xxxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: kernel@xxxxxxxxxxxxxxxxxx
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Cc: linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
> ---
> arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
> b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
> index 086d3a60ccce2..142d4a8731f8d 100644
> --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
> +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
> @@ -15,8 +15,8 @@ aliases {
> rtc0 = &hwrtc;
> rtc1 = &rtc;
> serial0 = &uart4;
> - serial1 = &usart3;
> - serial2 = &uart8;
> + serial1 = &uart8;
> + serial2 = &usart3;
> };
>
> chosen {
Reviewed-by: Christoph Niedermaier <cniedermaier@xxxxxxxxxxxxxxxxxx>
