Hi Dmitry,
On 2024/12/16 17:06, Dmitry Baryshkov wrote:
On Mon, Dec 16, 2024 at 11:12:24AM +0800, Damon Ding wrote:
Add the necessary DT changes to enable eDP0 on RK3588S EVB1 board:
- Add edp-panel node
- Set pinctrl of pwm12 for backlight
- Enable edp0/hdptxphy0/vp2
Signed-off-by: Damon Ding <damon.ding@xxxxxxxxxxxxxx>
---
Changes in v2:
- Remove brightness-levels and default-brightness-level properties in
backlight node.
- Add the detail DT changes to commit message.
---
.../boot/dts/rockchip/rk3588s-evb1-v10.dts | 50 +++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
index bc4077575beb..5c1ea25b6524 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
@@ -9,6 +9,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
#include <dt-bindings/usb/pd.h>
#include "rk3588s.dtsi"
@@ -120,6 +121,18 @@ backlight: backlight {
pwms = <&pwm12 0 25000 0>;
};
+ edp_panel: edp-panel {
+ compatible = "lg,lp079qx1-sp0v";
Please use aux-bus and a generic "edp-panel" entry for newer platforms
instead of declaring the panel on the platform bus. Placing eDP panels
on the platform bus has been deprecated for quite a while.
I will apply the aux-bus in the next version. :-)
+ backlight = <&backlight>;
+ power-supply = <&vcc3v3_lcd_edp>;
+
+ port {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&edp_out_panel>;
+ };
+ };
+ };
+
combophy_avdd0v85: regulator-combophy-avdd0v85 {
compatible = "regulator-fixed";
regulator-name = "combophy_avdd0v85";
Best regards,
Damon
