Le 13/12/2024 à 21:46, Frank Li a écrit :
From: Joy Zou <joy.zou-3arQi8VN3Tc@xxxxxxxxxxxxxxxx> Support new PMIC PF9453, which is totally difference with PCA9450. So create new file for it. The PF9453 is a single chip Power Management IC (PMIC) specifically designed for i.MX 91 processor. It provides power supply solutions for IoT (Internet of Things), smart appliance, and portable applications where size and efficiency are critical. The device provides four high efficiency step-down regulators, three LDOs, one 400 mA load switch and 32.768 kHz crystal oscillator driver.
...
+/* PF9453_REG_BUCK2_CTRL bits */ +#define BUCK2_RAMP_MASK GENMASK(7, 4)
This was 0xC0 in previous patch, so GENMASK(7, 6) if I'm correct. Which one is the good one? (the datasheet I've found does not give any details, so I can't check)
+#define BUCK2_RAMP_25MV 0x0 +#define BUCK2_RAMP_12P5MV 0x1 +#define BUCK2_RAMP_6P25MV 0x2 +#define BUCK2_RAMP_3P125MV 0x3
...
+/* PF9453_REG_LDO2_VOLT bits */ +#define LDO2_EN_MASK GENMASK(1, 0) +#define LDO2OUT_MASK GENMASK(6, 0) + +/* PF9453_REG_LDOSNVS_VOLT bits */ +#define LDOSNVS_EN_MASK 0x1
GENMASK(0, 0) to be consistent?
+#define LDOSNVSCFG1_MASK GENMASK(6, 0) + +/* PF9453_REG_IRQ bits */ +#define IRQ_RSVD 0x80 +#define IRQ_RSTB 0x40 +#define IRQ_ONKEY 0x20 +#define IRQ_RESETKEY 0x10 +#define IRQ_VR_FLT1 0x08 +#define IRQ_LOWVSYS 0x04 +#define IRQ_THERM_100 0x02 +#define IRQ_THERM_80 0x01 + +/* PF9453_REG_RESET_CTRL bits */ +#define WDOG_B_CFG_MASK GENMASK(7, 4)
This was 0xC0 in previous patch, so GENMASK(7, 6) if I'm correct. Which one is the good one?
+#define WDOG_B_CFG_NONE 0x00 +#define WDOG_B_CFG_WARM 0x40 +#define WDOG_B_CFG_COLD 0x80
... CJ
