On Fri, 13 Dec 2024 16:52:40 +0000, Vincenzo Frascino wrote:
> Convert the Xilinx SPDIF 2.0 device tree binding documentation to
> json-schema.
>
> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@xxxxxxx>
> ---
> .../devicetree/bindings/sound/xlnx,spdif.txt | 28 -----
> .../devicetree/bindings/sound/xlnx,spdif.yaml | 100 ++++++++++++++++++
> 2 files changed, 100 insertions(+), 28 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/xlnx,spdif.txt
> create mode 100644 Documentation/devicetree/bindings/sound/xlnx,spdif.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/xlnx,spdif.yaml: xlnx,aud_clk_i: missing type definition
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/xlnx,spdif.yaml: properties:xlnx,spdif-mode: 'minimum' should not be valid under {'enum': ['const', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', 'minimum', 'maximum', 'multipleOf', 'pattern']}
hint: Scalar and array keywords cannot be mixed
from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/xlnx,spdif.yaml: properties:xlnx,spdif-mode: 'maximum' should not be valid under {'enum': ['const', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', 'minimum', 'maximum', 'multipleOf', 'pattern']}
hint: Scalar and array keywords cannot be mixed
from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/xlnx,spdif.yaml: properties:xlnx,spdif-mode:maxItems: False schema does not allow 1
hint: Scalar properties should not have array keywords
from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/xlnx,spdif.yaml: title: 'Device-Tree bindings for Xilinx SPDIF IP' should not be valid under {'pattern': '([Bb]inding| [Ss]chema)'}
hint: Everything is a binding/schema, no need to say it. Describe what hardware the binding is for.
from schema $id: http://devicetree.org/meta-schemas/base.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/xlnx,spdif.example.dtb: spdif@80010000: reg: [[0, 2147549184], [0, 65536]] is too long
from schema $id: http://devicetree.org/schemas/sound/xlnx,spdif.yaml#
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241213165240.3652961-4-vincenzo.frascino@xxxxxxx
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
