The Morello architecture is an experimental extension to Armv8.2-A,
which extends the AArch64 state with the principles proposed in
version 7 of the Capability Hardware Enhanced RISC Instructions
(CHERI) ISA.
The Morello Platform (soc) and the Fixed Virtual Platfom (fvp) share
some functionalities that have conveniently been included in
morello.dtsi to avoid duplication.
Introduce morello.dtsi.
Note: Morello fvp will be introduced with a future patch series.
Cc: Sudeep Holla <sudeep.holla@xxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@xxxxxxx>
---
arch/arm64/boot/dts/arm/morello.dtsi | 112 +++++++++++++++++++++++++++
1 file changed, 112 insertions(+)
create mode 100644 arch/arm64/boot/dts/arm/morello.dtsi
diff --git a/arch/arm64/boot/dts/arm/morello.dtsi b/arch/arm64/boot/dts/arm/morello.dtsi
new file mode 100644
index 000000000000..9d84a0840c5b
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/morello.dtsi
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (c) 2020-2024, Arm Limited. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "arm,morello";
+
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &soc_uart0;
+ };
+
+ gic: interrupt-controller@2c010000 {
+ compatible = "arm,gic-v3";
+ #address-cells = <2>;
+ #interrupt-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ spe-pmu {
+ compatible = "arm,statistical-profiling-extension-v1";
+ interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ mailbox: mhu@45000000 {
+ compatible = "arm,mhu-doorbell", "arm,primecell";
+ reg = <0x0 0x45000000 0x0 0x1000>;
+ interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mhu-lpri-rx",
+ "mhu-hpri-rx";
+ #mbox-cells = <2>;
+ mbox-name = "ARM-MHU";
+ clocks = <&soc_refclk50mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ sram: sram@45200000 {
+ compatible = "mmio-sram";
+ reg = <0x0 0x06000000 0x0 0x8000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x06000000 0x8000>;
+
+ cpu_scp_hpri0: scp-sram@0 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0x80>;
+ };
+
+ cpu_scp_hpri1: scp-sram@80 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x80 0x80>;
+ };
+ };
+
+ soc_refclk50mhz: refclk50mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ clock-output-names = "apb_pclk";
+ };
+
+ soc_refclk85mhz: refclk85mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <85000000>;
+ clock-output-names = "iofpga:aclk";
+ };
+
+ soc_uartclk: uartclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ clock-output-names = "uartclk";
+ };
+
+ soc_uart0: serial@2a400000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0x2a400000 0x0 0x1000>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_uartclk>, <&soc_refclk50mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "okay";
+ };
+};
--
2.43.0
