Hi Tomi,
Thank you for the patch.
On Thu, Dec 05, 2024 at 03:45:02PM +0200, Tomi Valkeinen wrote:
> From: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx>
>
> Add support for r8a779h0. It is very similar to r8a779g0, but has only
> one output.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx>
> Tested-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c | 18 ++++++++++++++++++
> drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c | 4 +++-
> 2 files changed, 21 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c
> index fb719d9aff10..7858e10839f2 100644
> --- a/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c
> +++ b/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c
> @@ -545,6 +545,23 @@ static const struct rcar_du_device_info rcar_du_r8a779g0_info = {
> .dsi_clk_mask = BIT(1) | BIT(0),
> };
>
> +static const struct rcar_du_device_info rcar_du_r8a779h0_info = {
> + .gen = 4,
> + .features = RCAR_DU_FEATURE_CRTC_IRQ
> + | RCAR_DU_FEATURE_VSP1_SOURCE
> + | RCAR_DU_FEATURE_NO_BLENDING,
> + .channels_mask = BIT(0),
> + .routes = {
> + /* R8A779H0 has one MIPI DSI output. */
> + [RCAR_DU_OUTPUT_DSI0] = {
> + .possible_crtcs = BIT(0),
> + .port = 0,
> + },
> + },
> + .num_rpf = 5,
> + .dsi_clk_mask = BIT(0),
> +};
> +
> static const struct of_device_id rcar_du_of_table[] = {
> { .compatible = "renesas,du-r8a7742", .data = &rcar_du_r8a7790_info },
> { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
> @@ -571,6 +588,7 @@ static const struct of_device_id rcar_du_of_table[] = {
> { .compatible = "renesas,du-r8a77995", .data = &rcar_du_r8a7799x_info },
> { .compatible = "renesas,du-r8a779a0", .data = &rcar_du_r8a779a0_info },
> { .compatible = "renesas,du-r8a779g0", .data = &rcar_du_r8a779g0_info },
> + { .compatible = "renesas,du-r8a779h0", .data = &rcar_du_r8a779h0_info },
> { }
> };
>
> diff --git a/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c
> index 0fbf6abbde6e..b9ae6cc43702 100644
> --- a/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c
> +++ b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c
> @@ -107,10 +107,12 @@ static void rcar_du_group_setup_didsr(struct rcar_du_group *rgrp)
> */
> rcrtc = rcdu->crtcs;
> num_crtcs = rcdu->num_crtcs;
> - } else if (rcdu->info->gen >= 3 && rgrp->num_crtcs > 1) {
> + } else if ((rcdu->info->gen == 3 && rgrp->num_crtcs > 1) ||
> + rcdu->info->gen == 4) {
> /*
> * On Gen3 dot clocks are setup through per-group registers,
> * only available when the group has two channels.
> + * On Gen4 the registers are there for single channel too.
> */
> rcrtc = &rcdu->crtcs[rgrp->index * 2];
> num_crtcs = rgrp->num_crtcs;
>
--
Regards,
Laurent Pinchart
