Make measurements right-justified, since it is the default for the driver and sensor. By not setting the ADXL345_DATA_FORMAT_JUSTIFY bit, the data becomes right-judstified. This was the original setting, there is no reason to change it to left-justified, where right-justified simplifies working on the registers. Signed-off-by: Lothar Rubusch <l.rubusch@xxxxxxxxx> --- drivers/iio/accel/adxl345_core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c index 88df9547bd6..98ff37271f1 100644 --- a/drivers/iio/accel/adxl345_core.c +++ b/drivers/iio/accel/adxl345_core.c @@ -184,7 +184,6 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap, struct iio_dev *indio_dev; u32 regval; unsigned int data_format_mask = (ADXL345_DATA_FORMAT_RANGE | - ADXL345_DATA_FORMAT_JUSTIFY | ADXL345_DATA_FORMAT_FULL_RES | ADXL345_DATA_FORMAT_SELF_TEST); int ret; -- 2.39.2
