The series adds support for spread spectrum clocking for i.MX8MN PLLs (audio, video and DRAM). It has been tested for the video PLL on a board using i.MX8MN. The patches added in version 4, such as the dt-bindings and the driver for anatop, were inspired by the extensive email exchange from version 3: https://lore.kernel.org/imx/20241106090549.3684963-1-dario.binacchi@xxxxxxxxxxxxxxxxxxxx/ Version 5 adds only a few fixes to some patches, merely addressing compilation errors and warnings raised by checkpatch, but otherwise does not alter the structure of version 4. The series added spectrum spread support for the imx8mn platform only, but in case it was merged, confirming that the directives and suggestions made by the maintainers were correctly understood and implemented, I will extend this support to the imx8mm and imx8mp platforms as well. Changes in v5: - Fix compilation errors. - Separate driver code from dt-bindings Changes in v4: - Add dt-bindings for anatop - Add anatop driver - Drop fsl,ssc-clocks from spread spectrum dt-bindings Changes in v3: - Patches 1/8 has been added in version 3. The dt-bindings have been moved from fsl,imx8m-anatop.yaml to imx8m-clock.yaml. The anatop device (fsl,imx8m-anatop.yaml) is indeed more or less a syscon, so it represents a memory area accessible by ccm (imx8m-clock.yaml) to setup the PLLs. - Patches {3,5}/8 have been added in version 3. - Patches {4,6,8}/8 use ccm device node instead of the anatop one. Changes in v2: - Add "allOf:" and place it after "required:" block, like in the example schema. - Move the properties definition to the top-level. - Drop unit types as requested by the "make dt_binding_check" command. Dario Binacchi (20): dt-bindings: clock: imx8mm: add VIDEO_PLL clocks clk: imx8mm: rename video_pll1 to video_pll dt-bindings: clock: imx8mp: add VIDEO_PLL clocks clk: imx8mp: rename video_pll1 to video_pll dt-bindings: clock: imx8m-anatop: define clocks/clock-names arm64: dts: imx8mm: add anatop clocks arm64: dts: imx8mn: add anatop clocks arm64: dts: imx8mp: add anatop clocks arm64: dts: imx8mq: add anatop clocks dt-bindings: clock: imx8mm: add binding definitions for anatop dt-bindings: clock: imx8mn: add binding definitions for anatop dt-bindings: clock: imx8mp: add binding definitions for anatop clk: imx: add hw API imx8m_anatop_get_clk_hw clk: imx: add support for i.MX8MN anatop clock driver dt-bindings: clock: imx8m-clock: support spread spectrum clocking arm64: dts: imx8mm: add PLLs to clock controller module (ccm) arm64: dts: imx8mn: add PLLs to clock controller module (ccm) arm64: dts: imx8mp: add PLLs to clock controller module (ccm) clk: imx: pll14xx: support spread spectrum clock generation clk: imx8mn: support spread spectrum clock generation .../bindings/clock/fsl,imx8m-anatop.yaml | 53 +++- .../bindings/clock/imx8m-clock.yaml | 77 ++++- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 11 +- arch/arm64/boot/dts/freescale/imx8mn.dtsi | 11 +- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 11 +- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 2 + drivers/clk/imx/Makefile | 2 +- drivers/clk/imx/clk-imx8mm.c | 102 +++---- drivers/clk/imx/clk-imx8mn-anatop.c | 281 ++++++++++++++++++ drivers/clk/imx/clk-imx8mn.c | 188 ++++++------ drivers/clk/imx/clk-imx8mp.c | 118 ++++---- drivers/clk/imx/clk-pll14xx.c | 126 ++++++++ drivers/clk/imx/clk.c | 28 ++ drivers/clk/imx/clk.h | 23 ++ include/dt-bindings/clock/imx8mm-clock.h | 78 ++++- include/dt-bindings/clock/imx8mn-clock.h | 67 +++++ include/dt-bindings/clock/imx8mp-clock.h | 82 ++++- 17 files changed, 1026 insertions(+), 234 deletions(-) create mode 100644 drivers/clk/imx/clk-imx8mn-anatop.c -- 2.43.0
