Add interrupt-names INT1 and INT2 for the two interrupt lines of the
sensor. Only one line will be connected for incoming events. The driver
needs to be configured accordingly. If no interrupt line is set up, the
sensor will still measure, but no events are possible.
Signed-off-by: Lothar Rubusch <l.rubusch@xxxxxxxxx>
---
.../devicetree/bindings/iio/accel/adi,adxl345.yaml | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
index 280ed479ef5..a4c2cefe1a4 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@@ -37,6 +37,15 @@ properties:
interrupts:
maxItems: 1
+ interrupt-names:
+ description: Use either INT1 or INT2 for events, or ignore events.
+ minItems: 1
+ maxItems: 2
+ items:
+ enum:
+ - INT1
+ - INT2
+
required:
- compatible
- reg
@@ -61,6 +70,7 @@ examples:
reg = <0x2a>;
interrupt-parent = <&gpio0>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "INT1";
};
};
- |
@@ -79,5 +89,6 @@ examples:
spi-cpha;
interrupt-parent = <&gpio0>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "INT2";
};
};
--
2.39.2
