On 11/19/24 20:01, Francesco Dolcini wrote: > Hello Thomas and TI folks, > > On Wed, Nov 13, 2024 at 11:43:05AM +0100, Thomas Richard wrote: >> Like on j7200, pinctrl contexts shall be saved and restored during >> suspend-to-ram. >> >> So use ti,j7200-padconf compatible. >> >> Signed-off-by: Thomas Richard <thomas.richard@xxxxxxxxxxx> >> --- >> Use ti,j7200-padconf compatible to save and restore pinctrl contexts during >> suspend-to-ram. >> --- >> arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 6 +++--- >> arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 12 ++++++------ > > Do j784s4 supports any kind of low power mode and/or suspend to ram? My > understanding was that this was not supported, but maybe there is some > details that was lost when I was told this information. Hello Francesco, We are working on suspend-to-ram support for j7200 and j784s4. During suspend-to-ram the SoC is fully powered-off (thanks to the PMIC which powers off all the power rails except the DDR which is in self-refresh), like on j7200. Please let me know if you want more details. Regards, Thomas