Like on j7200, pinctrl contexts shall be saved and restored during
suspend-to-ram.
So use ti,j7200-padconf compatible.
Signed-off-by: Thomas Richard <thomas.richard@xxxxxxxxxxx>
---
Use ti,j7200-padconf compatible to save and restore pinctrl contexts during
suspend-to-ram.
---
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 6 +++---
arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 12 ++++++------
2 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index e73bb750b09a..b25d9a6aff2c 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -230,7 +230,7 @@ main_gpio_intr: interrupt-controller@a00000 {
};
main_pmx0: pinctrl@11c000 {
- compatible = "pinctrl-single";
+ compatible = "ti,j7200-padconf", "pinctrl-single";
/* Proxy 0 addressing */
reg = <0x00 0x11c000 0x00 0x120>;
#pinctrl-cells = <1>;
@@ -240,7 +240,7 @@ main_pmx0: pinctrl@11c000 {
/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
main_timerio_input: pinctrl@104200 {
- compatible = "pinctrl-single";
+ compatible = "ti,j7200-padconf", "pinctrl-single";
reg = <0x00 0x104200 0x00 0x50>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
@@ -249,7 +249,7 @@ main_timerio_input: pinctrl@104200 {
/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
main_timerio_output: pinctrl@104280 {
- compatible = "pinctrl-single";
+ compatible = "ti,j7200-padconf", "pinctrl-single";
reg = <0x00 0x104280 0x00 0x20>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
index 2c97d1c7ebcd..36341665177f 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -76,7 +76,7 @@ mcu_ram: sram@41c00000 {
};
wkup_pmx0: pinctrl@4301c000 {
- compatible = "pinctrl-single";
+ compatible = "ti,j7200-padconf", "pinctrl-single";
/* Proxy 0 addressing */
reg = <0x00 0x4301c000 0x00 0x034>;
#pinctrl-cells = <1>;
@@ -85,7 +85,7 @@ wkup_pmx0: pinctrl@4301c000 {
};
wkup_pmx1: pinctrl@4301c038 {
- compatible = "pinctrl-single";
+ compatible = "ti,j7200-padconf", "pinctrl-single";
/* Proxy 0 addressing */
reg = <0x00 0x4301c038 0x00 0x02c>;
#pinctrl-cells = <1>;
@@ -94,7 +94,7 @@ wkup_pmx1: pinctrl@4301c038 {
};
wkup_pmx2: pinctrl@4301c068 {
- compatible = "pinctrl-single";
+ compatible = "ti,j7200-padconf", "pinctrl-single";
/* Proxy 0 addressing */
reg = <0x00 0x4301c068 0x00 0x120>;
#pinctrl-cells = <1>;
@@ -103,7 +103,7 @@ wkup_pmx2: pinctrl@4301c068 {
};
wkup_pmx3: pinctrl@4301c190 {
- compatible = "pinctrl-single";
+ compatible = "ti,j7200-padconf", "pinctrl-single";
/* Proxy 0 addressing */
reg = <0x00 0x4301c190 0x00 0x004>;
#pinctrl-cells = <1>;
@@ -125,7 +125,7 @@ wkup_gpio_intr: interrupt-controller@42200000 {
/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
mcu_timerio_input: pinctrl@40f04200 {
- compatible = "pinctrl-single";
+ compatible = "ti,j7200-padconf", "pinctrl-single";
reg = <0x00 0x40f04200 0x00 0x28>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
@@ -136,7 +136,7 @@ mcu_timerio_input: pinctrl@40f04200 {
/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
mcu_timerio_output: pinctrl@40f04280 {
- compatible = "pinctrl-single";
+ compatible = "ti,j7200-padconf", "pinctrl-single";
reg = <0x00 0x40f04280 0x00 0x28>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
---
base-commit: eff6d7cad08c4ce4e3456fd7f8f1d94c81cd2b63
change-id: 20241108-j784s4-s2r-pinctrl-643e1ac2014c
Best regards,
--
Thomas Richard <thomas.richard@xxxxxxxxxxx>
