From: Niravkumar L Rabara <niravkumar.l.rabara@xxxxxxxxx>
Add gpio0 controller node and correct DMA handshake ID for SPI
tx and rx channels.
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@xxxxxxxxx>
---
.../arm64/boot/dts/intel/socfpga_agilex5.dtsi | 24 ++++++++++++++++++-
1 file changed, 23 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
index 1162978329c1..51c6e19e40b8 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
@@ -222,6 +222,26 @@ i3c1: i3c@10da1000 {
status = "disabled";
};
+ gpio0: gpio@ffc03200 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xffc03200 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&rst GPIO0_RESET>;
+ status = "disabled";
+
+ porta: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <24>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
gpio1: gpio@10c03300 {
compatible = "snps,dw-apb-gpio";
reg = <0x10c03300 0x100>;
@@ -314,7 +334,7 @@ spi0: spi@10da4000 {
reg-io-width = <4>;
num-cs = <4>;
clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>;
- dmas = <&dmac0 2>, <&dmac0 3>;
+ dmas = <&dmac0 16>, <&dmac0 17>;
dma-names = "tx", "rx";
status = "disabled";
@@ -331,6 +351,8 @@ spi1: spi@10da5000 {
reg-io-width = <4>;
num-cs = <4>;
clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>;
+ dmas = <&dmac0 20>, <&dmac0 21>;
+ dma-names = "tx", "rx";
status = "disabled";
};
--
2.25.1
