Il 02/12/24 13:25, Frank Wunderlich ha scritto:
From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
arm64: dts: mediatek: mt7988a-bpi-r4: Add MediaTek MT6682A/RT5190A PMIC
The BananaPi R4 board has a MediaTek MT8862A PMIC, a rebrand of the
Richtek RT5190A chip, connected to the I2C0 bus.
Add the relevant node and, while at it, also configure the regulators
from this PMIC that are used on this board.
Bananapi R4 Board contains a MT6682A pmic which is compatible to rt5190a.
Add its node to the i2 controller.
Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
---
.../dts/mediatek/mt7988a-bananapi-bpi-r4.dts | 51 +++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
index 13ca016d6a67..bc1ec73b8ddd 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
@@ -2,6 +2,8 @@
/dts-v1/;
+#include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
+
#include "mt7988a.dtsi"
/ {
@@ -65,6 +67,55 @@ &i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay";
+
+ rt5190a_64: rt5190a@64 {
+ compatible = "richtek,rt5190a";
+ reg = <0x64>;
+ vin2-supply = <&rt5190_buck1>;
+ vin3-supply = <&rt5190_buck1>;
+ vin4-supply = <&rt5190_buck1>;
+
+ regulators {
+ rt5190_buck1: buck1 {
+ regulator-name = "rt5190a-buck1";
+ regulator-min-microvolt = <5090000>;
+ regulator-max-microvolt = <5090000>;
+ regulator-allowed-modes =
+ <RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
Does it work like that?
regulator-allowed-modes = <RT5190A_OPMODE_AUTO>,
<RT5190A_OPMODE_FPWM>;
If yes, please write it like that - if not, I'm sad - but regardless
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
