Add everything needed to support the DSI output on Renesas r8a779h0
(V4M) SoC, and the DP output (via sn65dsi86 DSI to DP bridge) on the
Renesas grey-hawk board.
Overall the DSI and the board design is almost identical to Renesas
r8a779g0 and white-hawk board.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx>
---
Tomi Valkeinen (9):
dt-bindings: display: bridge: renesas,dsi-csi2-tx: Add r8a779h0
dt-bindings: display: renesas,du: Add r8a779h0
clk: renesas: r8a779h0: Add display clocks
drm/rcar-du: dsi: Fix PHY lock bit check
drm/rcar-du: dsi: Add r8a779h0 support
drm/rcar-du: Add support for r8a779h0
arm64: dts: renesas: gray-hawk-single: Fix indentation
arm64: dts: renesas: r8a779h0: Add display support
arm64: dts: renesas: gray-hawk-single: Add DisplayPort support
.../display/bridge/renesas,dsi-csi2-tx.yaml | 1 +
.../devicetree/bindings/display/renesas,du.yaml | 1 +
.../boot/dts/renesas/r8a779h0-gray-hawk-single.dts | 119 ++++++++++++++++++---
arch/arm64/boot/dts/renesas/r8a779h0.dtsi | 77 +++++++++++++
drivers/clk/renesas/r8a779h0-cpg-mssr.c | 4 +
drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c | 19 ++++
drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.h | 1 +
drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c | 16 +--
drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c | 4 +-
.../gpu/drm/renesas/rcar-du/rcar_mipi_dsi_regs.h | 1 -
10 files changed, 223 insertions(+), 20 deletions(-)
---
base-commit: adc218676eef25575469234709c2d87185ca223a
change-id: 20241008-rcar-gh-dsi-9c01f5deeac8
Best regards,
--
Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
