From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
This new property can be used for boards which have the SD_VSEL tied
to a fixed low level. The voltage of LDO5 is therefore only controlled
by writing to the LDO5CTRL_L register.
Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
---
Changes for v2:
* new patch
---
.../bindings/regulator/nxp,pca9450-regulator.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
index 5d0d684186c96..0e19c54aa5f8a 100644
--- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
@@ -49,6 +49,12 @@ properties:
Properties for single LDO5 regulator.
properties:
+ nxp,sd-vsel-fixed-low:
+ type: boolean
+ description:
+ Let the driver know that SD_VSEL is hardwired to low level and
+ there is no GPIO to get the actual value from.
+
sd-vsel-gpios:
description:
GPIO that can be used to read the current status of the SD_VSEL
--
2.46.1
