On Thu, 21 Nov 2024 10:18:25 +0000
Guillaume Stols <gstols@xxxxxxxxxxxx> wrote:
> This is a preparation for the intoduction of the sofware functions in
> the iio backend version of the driver.
> The software mode configuration must be executed once the channels are
> configured, and the number of channels is known. This is not the case
> before iio-backend's configuration is called, and iio backend version of
> the driver does not have a timestamp channel.
> Also the sw_mode_config callback is configured during the
> iio-backend configuration.
> For clarity purpose, I moved the entire block instead of just the
> concerned function calls.
>
> Signed-off-by: Guillaume Stols <gstols@xxxxxxxxxxxx>
> ---
> drivers/iio/adc/ad7606.c | 25 ++++++++++++++-----------
> 1 file changed, 14 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
> index 893b93b86aa7..828603ed18f6 100644
> --- a/drivers/iio/adc/ad7606.c
> +++ b/drivers/iio/adc/ad7606.c
> @@ -1246,17 +1246,6 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
> return -ERESTARTSYS;
> }
>
> - st->write_scale = ad7606_write_scale_hw;
> - st->write_os = ad7606_write_os_hw;
> -
> - ret = ad7606_sw_mode_setup(indio_dev);
Isn't this the only call to this function?
> - if (ret)
> - return ret;
> -
> - ret = ad7606_chan_scales_setup(indio_dev);
> - if (ret)
> - return ret;
> -
> /* If convst pin is not defined, setup PWM. */
> if (!st->gpio_convst) {
> st->cnvst_pwm = devm_pwm_get(dev, NULL);
> @@ -1334,6 +1323,20 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
> return ret;
> }
>
> + st->write_scale = ad7606_write_scale_hw;
> + st->write_os = ad7606_write_os_hw;
> +
> + st->sw_mode_en = st->chip_info->sw_setup_cb &&
> + device_property_present(st->dev, "adi,sw-mode");
> + if (st->sw_mode_en) {
> + indio_dev->info = &ad7606_info_sw_mode;
> + st->chip_info->sw_setup_cb(indio_dev);
Where did this callback come from?
Looks like this and the next patch need tidying up so each does
one distinct thing.
> + }
> +
> + ret = ad7606_chan_scales_setup(indio_dev);
> + if (ret)
> + return ret;
> +
> return devm_iio_device_register(dev, indio_dev);
> }
> EXPORT_SYMBOL_NS_GPL(ad7606_probe, IIO_AD7606);
>
