Hi Lukasz,
On Odroidxu3 board critical temp is 85.0 C. Below is the sensors output.
therm_zone0-virtual-0
Adapter: Virtual device
temp1: +39.0▒ၰC (crit = +85.0▒°C)
temp2: +38.0▒°C (crit = +85.0▒°C)
temp3: +40.0▒°C (crit = +85.0▒°C)
temp4: +49.0▒°C (crit = +85.0▒°C)
temp5: +29.0▒°C (crit = +85.0▒°C)
I have observed cpu shutdown as we do test pm-qa thermal testing.
So I propose the temperature values to be 50000, 65000 ,80000 and
85000 Critical temperature.
Please share your thoughts.
-Anand Moon
On 8 April 2015 at 13:32, Lukasz Majewski <l.majewski@xxxxxxxxxxx> wrote:
> Hi Anand,
>
>> Move the registration of thermal sensors for tmu_cpu0 from
>> exynos5420.dtsi to exynos5-cpu-thermal.dtsi, to avoid duplicate
>> registration of the sensors.
>>
>> Tested on OdroidXU3 board.
>>
>> Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
>> ---
>> arch/arm/boot/dts/exynos5-cpu-thermal.dtsi | 58
>> ++++++++++++++++++++++++++++++
>> arch/arm/boot/dts/exynos5420.dtsi | 4 ---
>> arch/arm/boot/dts/exynos5422-odroidxu3.dts | 1 + 3 files changed, 59
>> insertions(+), 4 deletions(-) create mode 100644
>> arch/arm/boot/dts/exynos5-cpu-thermal.dtsi
>>
>> diff --git a/arch/arm/boot/dts/exynos5-cpu-thermal.dtsi
>> b/arch/arm/boot/dts/exynos5-cpu-thermal.dtsi new file mode 100644
>> index 0000000..8fede70
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/exynos5-cpu-thermal.dtsi
>> @@ -0,0 +1,58 @@
>> +/*
>> + * Device tree sources for Exynos5 thermal zone
>> + *
>> + * Copyright (c) 2014 Lukasz Majewski <l.majewski@xxxxxxxxxxx>
>
> ^^^^^^^^^^^^^^^^ Could you update this
> line :-). I'm just reviewer here :-)
>
>> + *
>> + * This program is free software; you can redistribute it and/or
>> modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + */
>> +
>> +#include <dt-bindings/thermal/thermal.h>
>> +
>> +/ {
>> + thermal-zones {
>> + cpu0_thermal: cpu0-thermal {
>> + thermal-sensors = <&tmu_cpu0>;
>> + polling-delay-passive = <0>;
>> + polling-delay = <0>;
>> + trips {
>> + cpu_alert0: cpu-alert-0 {
>> + temperature = <48000>; /* ms
>> */
>> + hysteresis = <3000>; /* ms */
> ^^^^^^^^^
> We already have
> "millicelsius"
> instead od ms
>> + type = "active";
>> + };
>> + cpu_alert1: cpu-alert-1 {
>> + temperature = <53000>; /* ms
>> */
>> + hysteresis = <3000>; /* ms */
>> + type = "active";
>> + };
>> + cpu_alert2: cpu-alert-2 {
>> + temperature = <59000>; /* ms
>> */
>> + hysteresis = <3000>; /* ms */
>> + type = "active";
>> + };
>> + cpu_crit0: cpu-crit-0 {
>> + temperature = <75000>; /* ms
>> */
>> + hysteresis = <0>; /* ms */
>> + type = "critical";
>
> Is there any special reasons why we need special values
> for cpu0_thermal sensor at XU3? Is something wrong with
> default values defined at exynos4-cpu-thermal.dtsi?
>
> If this is Odroid XU3 specific, then IMHO it should be
> added to exynos5422-odroidxu3.dts
>
>> + };
>> + };
>> + cooling-maps {
>> + map0 {
>> + trip = <&cpu_alert0>;
>> + cooling-device = <&fan0 0 1>;
>> + };
>> + map1 {
>> + trip = <&cpu_alert1>;
>> + cooling-device = <&fan0 1 2>;
>> + };
>> + map2 {
>> + trip = <&cpu_alert2>;
>> + cooling-device = <&fan0 2 3>;
>> + };
>> + };
>> + };
>> + };
>> +};
>> diff --git a/arch/arm/boot/dts/exynos5420.dtsi
>> b/arch/arm/boot/dts/exynos5420.dtsi index 6b49f3c..eb0f16c 100644
>> --- a/arch/arm/boot/dts/exynos5420.dtsi
>> +++ b/arch/arm/boot/dts/exynos5420.dtsi
>> @@ -827,10 +827,6 @@
>> };
>>
>> thermal-zones {
>> - cpu0_thermal: cpu0-thermal {
>> - thermal-sensors = <&tmu_cpu0>;
>> - #include "exynos5420-trip-points.dtsi"
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [1]
>
>> - };
>> cpu1_thermal: cpu1-thermal {
>> thermal-sensors = <&tmu_cpu1>;
>> #include "exynos5420-trip-points.dtsi"
>> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
>> b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index eaec006..c8b3e3e
>> 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
>> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
>> @@ -12,6 +12,7 @@
>>
>> /dts-v1/;
>> #include "exynos5800.dtsi"
>> +#include "exynos5-cpu-thermal.dtsi"
>
> I would prefer to stick to convention proposed at [1]. It keeps
> the locality of the include with respective thermal zone.
>
>>
>> / {
>> model = "Hardkernel Odroid XU3";
>
> DTS changes should be added to Samsung tree by Samsung maintainer - Mr.
> Kukjin Kim.
>
> --
> Best regards,
>
> Lukasz Majewski
>
> Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
