On Wed, 2015-04-08 at 10:28 +0200, Lukasz Majewski wrote: > Hi Anand, > > > From: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx> > > When disabling the samsung PWM the output state remains at the level > > it was in the end of a pwm cycle. In other words, calling pwm_disable > > when at 100% duty will keep the output active, while at all other > > setting the output will go/stay inactive. On top of that the samsung > > PWM settings are double-buffered, which means the new settings only > > get applied at the start of a new PWM cycle. This patch is already in the linux-pwm for-next tree so should probably be dropped form this patchset to prevent conflicts. -- Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx> Collabora Ltd. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
