Re: [PATCH v3 1/2] arm64: dts: qcom: qcs615: add SDHC1 and SDHC2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 25.11.2024 3:20 AM, Yuanjie Yang wrote:
> On Fri, Nov 22, 2024 at 01:35:28PM +0100, Krzysztof Kozlowski wrote:
>> On 22/11/2024 09:40, Yuanjie Yang wrote:
>>> On Fri, Nov 22, 2024 at 08:04:31AM +0100, Krzysztof Kozlowski wrote:
>>>> On 22/11/2024 07:51, Yuanjie Yang wrote:
>>>>> Add SDHC1 and SDHC2 support to the QCS615 Ride platform.
>>>>>
>>>>> Signed-off-by: Yuanjie Yang <quic_yuanjiey@xxxxxxxxxxx>
>>>>> ---

[...]

>>>>> +			bus-width = <8>;
>>>>> +			qcom,dll-config = <0x000f642c>;
>>>>> +			qcom,ddr-config = <0x80040868>;
>>>>> +			supports-cqe;
>>>>> +			dma-coherent;
>>>>> +			mmc-ddr-1_8v;
>>>>> +			mmc-hs200-1_8v;
>>>>> +			mmc-hs400-1_8v;
>>>>> +			mmc-hs400-enhanced-strobe;
>>>>
>>>> These are properties of memory, not SoC. If the node is disabled, means
>>>> memory is not attached to the SoC, right?
>>>>
>>>>> +			status = "disabled";
>>> Thanks, I think qcom,dll-config and qcom,ddr-config are properties of Soc,
>>> they are memory configurations that need to be written to the ioaddr.
>>> And mmc-ddr-1_8v,mmc-hs200-1_8v,mmc-hs400-1_8v are bus speed config,
>>> they indicate the bus speed at which the host contoller can operate.
>>> If the node is disabled, which means Soc don't support these properties.
>> No, that is not the meaning of node is disabled. When node is disabled,
>> it means board does not have attached memory.
>>
>> Move the memory related properties  to the board.
> 
> Thanks, Ok I understand, I will move the memory related
> properties(qcom,dll-config and qcom,ddr-config) to the
> board dts in next version.

DDR/DLL tuning seem to be done per SoC and not per board.

Konrad




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux