On 22/11/2024 09:40, Yuanjie Yang wrote:
> On Fri, Nov 22, 2024 at 08:04:31AM +0100, Krzysztof Kozlowski wrote:
>> On 22/11/2024 07:51, Yuanjie Yang wrote:
>>> Add SDHC1 and SDHC2 support to the QCS615 Ride platform.
>>>
>>> Signed-off-by: Yuanjie Yang <quic_yuanjiey@xxxxxxxxxxx>
>>> ---
>>> arch/arm64/boot/dts/qcom/qcs615.dtsi | 198 +++++++++++++++++++++++++++
>>> 1 file changed, 198 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi
>>> index 590beb37f441..37c6ab217c96 100644
>>> --- a/arch/arm64/boot/dts/qcom/qcs615.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi
>>> @@ -399,6 +399,65 @@ qfprom: efuse@780000 {
>>> #size-cells = <1>;
>>> };
>>>
>>> + sdhc_1: mmc@7c4000 {
>>> + compatible = "qcom,qcs615-sdhci", "qcom,sdhci-msm-v5";
>>> + reg = <0x0 0x007c4000 0x0 0x1000>,
>>> + <0x0 0x007c5000 0x0 0x1000>;
>>> + reg-names = "hc",
>>> + "cqhci";
>>> +
>>> + interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
>>> + interrupt-names = "hc_irq",
>>> + "pwr_irq";
>>> +
>>> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
>>> + <&gcc GCC_SDCC1_APPS_CLK>,
>>> + <&rpmhcc RPMH_CXO_CLK>,
>>> + <&gcc GCC_SDCC1_ICE_CORE_CLK>;
>>> + clock-names = "iface",
>>> + "core",
>>> + "xo",
>>> + "ice";
>>> +
>>> + resets = <&gcc GCC_SDCC1_BCR>;
>>> +
>>> + power-domains = <&rpmhpd RPMHPD_CX>;
>>> + operating-points-v2 = <&sdhc1_opp_table>;
>>> + iommus = <&apps_smmu 0x02c0 0x0>;
>>> + interconnects = <&aggre1_noc MASTER_SDCC_1 QCOM_ICC_TAG_ALWAYS
>>> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
>>> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
>>> + &config_noc SLAVE_SDCC_1 QCOM_ICC_TAG_ALWAYS>;
>>> + interconnect-names = "sdhc-ddr",
>>> + "cpu-sdhc";
>>> +
>>> + bus-width = <8>;
>>> + qcom,dll-config = <0x000f642c>;
>>> + qcom,ddr-config = <0x80040868>;
>>> + supports-cqe;
>>> + dma-coherent;
>>> + mmc-ddr-1_8v;
>>> + mmc-hs200-1_8v;
>>> + mmc-hs400-1_8v;
>>> + mmc-hs400-enhanced-strobe;
>>
>> These are properties of memory, not SoC. If the node is disabled, means
>> memory is not attached to the SoC, right?
>>
>>> + status = "disabled";
> Thanks, I think qcom,dll-config and qcom,ddr-config are properties of Soc,
> they are memory configurations that need to be written to the ioaddr.
> And mmc-ddr-1_8v,mmc-hs200-1_8v,mmc-hs400-1_8v are bus speed config,
> they indicate the bus speed at which the host contoller can operate.
> If the node is disabled, which means Soc don't support these properties.
No, that is not the meaning of node is disabled. When node is disabled,
it means board does not have attached memory.
Move the memory related properties to the board.
Best regards,
Krzysztof
