On 11/15, David Lechner wrote: > On 11/14/24 5:50 PM, Marcelo Schmitt wrote: > > Extend the AD4000 series device tree documentation to also describe > > PulSAR devices. > > > > Signed-off-by: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx> > > --- > > .../bindings/iio/adc/adi,ad4000.yaml | 115 +++++++++++++++++- > > 1 file changed, 114 insertions(+), 1 deletion(-) > > > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml > > index e413a9d8d2a2..35049071a9de 100644 > > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml > > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml > > @@ -19,6 +19,21 @@ description: | > > https://www.analog.com/media/en/technical-documentation/data-sheets/ad4020-4021-4022.pdf > > https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4001.pdf > > https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4003.pdf > > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7685.pdf > > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7686.pdf > > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7687.pdf > > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7688.pdf > > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7690.pdf > > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7691.pdf > > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7693.pdf > > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7694.pdf > > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7942.pdf > > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7946.pdf > > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7980.pdf > > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7982.pdf > > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7983.pdf > > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7984.pdf > > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7988-1_7988-5.pdf > > It would be nice to sort these lowest number first. Ack > > > > > $ref: /schemas/spi/spi-peripheral-props.yaml# > > > > @@ -63,6 +78,38 @@ properties: > > > > - const: adi,adaq4003 > > > > + - const: adi,ad7946 > > + - items: > > + - enum: > > + - adi,ad7942 > > + - const: adi,ad7946 > > + > > + - const: adi,ad7983 > > + - items: > > + - enum: > > + - adi,ad7980 > > + - adi,ad7988-5 > > + - adi,ad7686 > > + - adi,ad7685 > > + - adi,ad7694 > > + - adi,ad7988-1 > > + - const: adi,ad7983 > > + > > + - const: adi,ad7688 > > + - items: > > + - enum: > > + - adi,ad7693 > > + - adi,ad7687 > > + - const: adi,ad7688 > > + > > + - const: adi,ad7984 > > + - items: > > + - enum: > > + - adi,ad7982 > > + - adi,ad7690 > > + - adi,ad7691 > > + - const: adi,ad7984 > > + > > IMHO, having fallbacks just makes the bindings harder to use and doesn't > actually provide any useful benefit. > Having fallbacks was a suggestion from a dt maintainer to the ad4000 series. I assumed they would ask it for PulSAR too. Will wait a comment from a dt maintainer to change it. > And with this many chips, it can be easy to overlook a small difference > in one chips, like ad7694 not having VIO pin, so is it really fallback > compatible? Easier to just avoid the question and not have fallbacks. > The absence of a VIO pin does not change how the driver handles the devices. They are compatible from software perspective. > > reg: > > maxItems: 1 > > > > @@ -129,10 +176,76 @@ required: > > - compatible > > - reg > > - vdd-supply > > - - vio-supply > > - ref-supply > > > > allOf: > > + # AD7694 doesn't have a VIO pin > > It sounds like using not: could make this if: a lot shorter. Ack > > Also, it looks like ad7983 doesn't have the pin either. Ack > > > + - if: > > + properties: > > + compatible: > > + contains: > > + enum: > > + - adi,ad4000 > > + - adi,ad4001 > > + - adi,ad4002 > > + - adi,ad4003 > > + - adi,ad4004 > > + - adi,ad4005 > > + - adi,ad4006 > > + - adi,ad4007 > > + - adi,ad4008 > > + - adi,ad4010 > > + - adi,ad4011 > > + - adi,ad4020 > > + - adi,ad4021 > > + - adi,ad4022 > > + - adi,adaq4001 > > + - adi,adaq4003 > > + - adi,ad7685 > > + - adi,ad7686 > > + - adi,ad7687 > > + - adi,ad7688 > > + - adi,ad7690 > > + - adi,ad7691 > > + - adi,ad7693 > > + - adi,ad7942 > > + - adi,ad7946 > > + - adi,ad7980 > > + - adi,ad7982 > > + - adi,ad7983 > > + - adi,ad7984 > > + - adi,ad7988-1 > > + - adi,ad7988-5 > > + then: > > + required: > > + - vio-supply > > + # Single-channel PulSAR devices have SDI either tied to VIO, GND, or host CS. > > To me, the more interesting thing to say here is that the sdi > option is omitted because these chips don't have a programmable > register. Yes, that's correct. But the adi,sdi-pin property is about what is connected to the SDI/MOSI pin so I kept the comment about hw connections only. We could in theory connect SDI to host MOSI and set MOSI idle high (if the controller supports that), but that is harder to describe. > > > + - if: > > + properties: > > + compatible: > > + contains: > > + enum: > > + - adi,ad7685 > > + - adi,ad7686 > > + - adi,ad7687 > > + - adi,ad7688 > > + - adi,ad7690 > > + - adi,ad7691 > > + - adi,ad7693 > > + - adi,ad7694 > > + - adi,ad7942 > > + - adi,ad7946 > > + - adi,ad7980 > > + - adi,ad7982 > > + - adi,ad7983 > > + - adi,ad7984 > > + - adi,ad7988-1 > > + - adi,ad7988-5 > > + then: > > + properties: > > + adi,sdi-pin: > > + enum: [ high, low, cs ] > > + default: high > > For the similar ad7944, Rob suggested that the default should be the equivalent > of "cs" since that is most like "regular" SPI. So I think it makes sense do the > same here. (The adi,spi-mode property in the ad7944 binding is named a bit > different, single = high, chain = low and _property omitted_ (default) = cs) Ack > > > # The configuration register can only be accessed if SDI is connected to MOSI > > - if: > > required: >
