Set reset gpio to active high
Fixes: b83e1669adce ("arm64: dts: marvell: mcbin: add support for PCIe")
Signed-off-by: Jenishkumar Maheshbhai Patel <jpatel2@xxxxxxxxxxx>
---
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index c864df9ec84d..a8c732a47360 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -181,7 +181,7 @@ &cp0_pcie0 {
pinctrl-0 = <&cp0_pcie_pins>;
num-lanes = <4>;
num-viewport = <8>;
- reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_HIGH>;
ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>,
<&cp0_comphy2 0>, <&cp0_comphy3 0>;
--
2.25.1
