> -----Original Message----- > From: Rob Herring (Arm) <robh@xxxxxxxxxx> > Sent: Friday, November 8, 2024 6:18 PM > To: Calam, Ramon Cristopher <RamonCristopher.Calam@xxxxxxxxxx> > Cc: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>; Conor Dooley > <conor+dt@xxxxxxxxxx>; Liam Girdwood <lgirdwood@xxxxxxxxx>; linux- > kernel@xxxxxxxxxxxxxxx; Mark Brown <broonie@xxxxxxxxxx>; > devicetree@xxxxxxxxxxxxxxx > Subject: Re: [PATCH 2/2] dt-bindings: regulator: Add adi,lt8722-regulator.yaml > > [External] > > > On Fri, 08 Nov 2024 17:35:44 +0800, Ramon Cristopher M. Calam wrote: > > Add documentation for device tree bindings of LT8722. > > > > Signed-off-by: Ramon Cristopher M. Calam > <ramoncristopher.calam@xxxxxxxxxx> > > --- > > .../regulator/adi,lt8722-regulator.yaml | 178 ++++++++++++++++++ > > 1 file changed, 178 insertions(+) > > create mode 100644 > Documentation/devicetree/bindings/regulator/adi,lt8722-regulator.yaml > > > > My bot found errors running 'make dt_binding_check' on your patch: > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > Error: Documentation/devicetree/bindings/regulator/adi,lt8722- > regulator.example.dts:42.44-45 syntax error > FATAL ERROR: Unable to parse input tree > make[2]: *** [scripts/Makefile.dtbs:129: > Documentation/devicetree/bindings/regulator/adi,lt8722- > regulator.example.dtb] Error 1 > make[2]: *** Waiting for unfinished jobs.... > make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1442: > dt_binding_check] Error 2 > make: *** [Makefile:224: __sub-make] Error 2 > > doc reference errors (make refcheckdocs): > > See > https://urldefense.com/v3/__https://patchwork.ozlabs.org/project/devicetr > ee-bindings/patch/20241108093544.9492-3- > ramoncristopher.calam@analog.com__;!!A3Ni8CS0y2Y!_KU8t2BD5P_t7WfxY > jWxOUHnAG7bO5XoQOA1gbUBMObfWMLO9SM6NZUCyTgbSxcxmC93rYrTs > 5Ombu0lvybSbA$ > > The base for the series is generally the latest rc1. A different dependency > should be noted in *this* patch. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit after running the above command yourself. Note > that DT_SCHEMA_FILES can be set to your schema file to speed up checking > your schema. However, it must be unset to test all examples with your > schema. I've checked and corrected the errors reported by 'make dt_binding_check'. The error was caused by the missing parenthesis on the negative value of the 'regulator-min-microvolt' property. I've rerun the command with the fix and no longer see the error. Will resubmit the patch soon. Thanks, Ramon
