The mediatek,mac-wol property is being handled backwards to what is
described in the binding: it currently enables PHY WOL when the property
is present and vice versa. Invert the driver logic so it matches the
binding description.
Fixes: fd1d62d80ebc ("net: stmmac: replace the use_phy_wol field with a flag")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
index f8ca81675407ade786f2b9a38c63511a0b7fb705..c9636832a570a211a53f9480b0a8aec56509199f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
@@ -589,9 +589,9 @@ static int mediatek_dwmac_common_data(struct platform_device *pdev,
plat->mac_interface = priv_plat->phy_mode;
if (priv_plat->mac_wol)
- plat->flags |= STMMAC_FLAG_USE_PHY_WOL;
- else
plat->flags &= ~STMMAC_FLAG_USE_PHY_WOL;
+ else
+ plat->flags |= STMMAC_FLAG_USE_PHY_WOL;
plat->riwt_off = 1;
plat->maxmtu = ETH_DATA_LEN;
plat->host_dma_width = priv_plat->variant->dma_bit_mask;
--
2.47.0
