Create a device tree for the 10 inch variants (P5100, P5110, P5113) Signed-off-by: Mithil Bavishi <bavishimithil@xxxxxxxxx> --- .../dts/ti/omap/omap4-samsung-espresso10.dts | 102 ++++++++++++++++++ 1 file changed, 102 insertions(+) create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts diff --git a/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts new file mode 100644 index 000000000..70bbef468 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts @@ -0,0 +1,102 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/dts-v1/; + +#include "omap4-samsung-espresso-common.dtsi" +#include <dt-bindings/power/summit,smb347-charger.h> +/ { + model = "Samsung Galaxy Tab 2 (10 inch)"; + compatible = "samsung,espresso10", "ti,omap4430", "ti,omap4"; + + i2c-gpio-5 { + smb347: charger@6 { + compatible = "summit,smb347"; + reg = <0x6>; // 0x0C >> 1 + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_EDGE_BOTH>; + + summit,enable-usb-charging; + summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>; + summit,chip-temperature-threshold-celsius = <120>; + summit,usb-current-limit-microamp = <1800000>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + pwms = <&pwm10 0 1600 0>; + power-supply = <®_lcd>; + enable-gpios = <&gpio3 31 GPIO_ACTIVE_HIGH>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; + + panel { + compatible = "samsung,ltn101al03", "panel-lvds"; + power-supply = <®_lcd>; + width-mm = <223>; + height-mm = <125>; + data-mapping = "vesa-24"; + backlight = <&backlight>; + + panel-timing { + clock-frequency = <69818000>; + + hback-porch = <64>; + hactive = <1280>; + hfront-porch = <16>; + hsync-len = <48>; + + vback-porch = <11>; + vactive = <800>; + vfront-porch = <16>; + vsync-len = <3>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; + }; +}; + +&i2c3 { + touchscreen: synaptics-rmi4-i2c@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&gpio2>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_pins>; + + avdd-supply = <®_touch_ldo_en>; + vdd-supply = <&ldo6>; + + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <200>; + + touchscreen-size-x = <1279>; + touchscreen-size-y = <799>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; -- 2.43.0