Enable the USB3 port on FriendlyELEC NanoPC-T6.
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@xxxxxxxxx>
---
.../boot/dts/rockchip/rk3588-nanopc-t6.dtsi | 36 +++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
index bf8e1f1116d1..b93c2590feb5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
@@ -171,6 +171,20 @@ vbus5v0_typec: vbus5v0-typec-regulator {
vin-supply = <&vcc5v0_sys>;
};
+ vbus5v0_usb: vbus5v0-usb-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb5v_pwren>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vbus5v0_usb";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
compatible = "regulator-fixed";
enable-active-high;
@@ -607,6 +621,10 @@ typec5v_pwren: typec5v-pwren {
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
+ usb5v_pwren: usb5v_pwren {
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
usbc0_int: usbc0-int {
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
};
@@ -1005,6 +1023,14 @@ &u2phy0_otg {
status = "okay";
};
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ status = "okay";
+};
+
&u2phy2_host {
status = "okay";
};
@@ -1044,6 +1070,11 @@ usbdp_phy0_typec_sbu: endpoint@1 {
};
};
+&usbdp_phy1 {
+ phy-supply = <&vbus5v0_usb>;
+ status = "okay";
+};
+
&usb_host0_ehci {
status = "okay";
};
@@ -1064,6 +1095,11 @@ usb_host0_xhci_drd_sw: endpoint {
};
};
+&usb_host1_xhci {
+ dr_mode = "host";
+ status = "okay";
+};
+
&usb_host1_ehci {
status = "okay";
};
--
2.25.1
