Hi Frank,
On 01/11/2024 20:22, Frank Li wrote:
> On Fri, Nov 01, 2024 at 10:06:09AM +0200, Andrei Stefanescu wrote:
>> SIUL2 is now represented as an mfd device. Therefore, the old
>> pinctrl node is deprecated. Move the pinctrl related properties
>> inside the new "nxp-siul2" node. The latter one is now used
>> to represent the mfd device.
>
> Generally, dt team want you to keep both for sometime to keep
> back compatiblity.
Just to make sure I understand correctly, I will keep the previous pinctrl
node and have both the new siul2 node and the old pinctrl one, right?
Best regards,
Andrei
>
> Frank
>>
>> Signed-off-by: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>
>> ---
>> arch/arm64/boot/dts/freescale/s32g2.dtsi | 26 +++++++++++-------------
>> arch/arm64/boot/dts/freescale/s32g3.dtsi | 26 +++++++++++-------------
>> 2 files changed, 24 insertions(+), 28 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
>> index fa054bfe7d5c..e14ce5503e1f 100644
>> --- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
>> @@ -114,20 +114,18 @@ soc@0 {
>> #size-cells = <1>;
>> ranges = <0 0 0 0x80000000>;
>>
>> - pinctrl: pinctrl@4009c240 {
>> - compatible = "nxp,s32g2-siul2-pinctrl";
>> - /* MSCR0-MSCR101 registers on siul2_0 */
>> - reg = <0x4009c240 0x198>,
>> - /* MSCR112-MSCR122 registers on siul2_1 */
>> - <0x44010400 0x2c>,
>> - /* MSCR144-MSCR190 registers on siul2_1 */
>> - <0x44010480 0xbc>,
>> - /* IMCR0-IMCR83 registers on siul2_0 */
>> - <0x4009ca40 0x150>,
>> - /* IMCR119-IMCR397 registers on siul2_1 */
>> - <0x44010c1c 0x45c>,
>> - /* IMCR430-IMCR495 registers on siul2_1 */
>> - <0x440110f8 0x108>;
>> + siul2: siul2@4009c000 {
>> + compatible = "nxp,s32g2-siul2";
>> + reg = <0x4009c000 0x179c>,
>> + <0x44010000 0x17b0>;
>> + reg-names = "siul20", "siul21";
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + gpio-ranges = <&siul2 0 0 102>, <&siul2 112 112 79>;
>> + gpio-reserved-ranges = <102 10>, <123 21>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
>>
>> jtag_pins: jtag-pins {
>> jtag-grp0 {
>> diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi
>> index b4226a9143c8..fa43d036686f 100644
>> --- a/arch/arm64/boot/dts/freescale/s32g3.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi
>> @@ -171,20 +171,18 @@ soc@0 {
>> #size-cells = <1>;
>> ranges = <0 0 0 0x80000000>;
>>
>> - pinctrl: pinctrl@4009c240 {
>> - compatible = "nxp,s32g2-siul2-pinctrl";
>> - /* MSCR0-MSCR101 registers on siul2_0 */
>> - reg = <0x4009c240 0x198>,
>> - /* MSCR112-MSCR122 registers on siul2_1 */
>> - <0x44010400 0x2c>,
>> - /* MSCR144-MSCR190 registers on siul2_1 */
>> - <0x44010480 0xbc>,
>> - /* IMCR0-IMCR83 registers on siul2_0 */
>> - <0x4009ca40 0x150>,
>> - /* IMCR119-IMCR397 registers on siul2_1 */
>> - <0x44010c1c 0x45c>,
>> - /* IMCR430-IMCR495 registers on siul2_1 */
>> - <0x440110f8 0x108>;
>> + siul2: siul2@4009c000 {
>> + compatible = "nxp,s32g3-siul2";
>> + reg = <0x4009c000 0x179c>,
>> + <0x44010000 0x17b0>;
>> + reg-names = "siul20", "siul21";
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + gpio-ranges = <&siul2 0 0 102>, <&siul2 112 112 79>;
>> + gpio-reserved-ranges = <102 10>, <123 21>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
>>
>> jtag_pins: jtag-pins {
>> jtag-grp0 {
>> --
>> 2.45.2
>>
