On Thu, Oct 31, 2024 at 10:35:54AM +0200, Ciprian Costea wrote: > From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx> > > This patch adds the dt-bindings for NXP S32G2/S32G3 SoCs RTC driver. > > Co-developed-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman@xxxxxxx> > Signed-off-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman@xxxxxxx> > Co-developed-by: Ghennadi Procopciuc <ghennadi.procopciuc@xxxxxxx> > Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@xxxxxxx> > Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx> > --- next time you can cc imx@xxxxxxxxxxxxxxx > .../devicetree/bindings/rtc/nxp,s32g-rtc.yaml | 99 +++++++++++++++++++ > 1 file changed, 99 insertions(+) > create mode 100644 Documentation/devicetree/bindings/rtc/nxp,s32g-rtc.yaml > > diff --git a/Documentation/devicetree/bindings/rtc/nxp,s32g-rtc.yaml b/Documentation/devicetree/bindings/rtc/nxp,s32g-rtc.yaml > new file mode 100644 > index 000000000000..3694af883dc7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/rtc/nxp,s32g-rtc.yaml > @@ -0,0 +1,99 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/rtc/nxp,s32g-rtc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: NXP S32G2/S32G3 Real Time Clock (RTC) > + > +maintainers: > + - Bogdan Hamciuc <bogdan.hamciuc@xxxxxxx> > + - Ciprian Marian Costea <ciprianmarian.costea@xxxxxxx> > + > +properties: > + compatible: > + oneOf: > + - enum: > + - nxp,s32g2-rtc > + - items: > + - const: nxp,s32g3-rtc > + - const: nxp,s32g2-rtc > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + "#clock-cells": > + const: 1 Does your RTC is clock provider? why need #clock-cells > + > + clocks: > + items: > + - description: ipg clock drives the access to the > + RTC iomapped registers > + > + clock-names: > + items: > + - const: ipg > + > + assigned-clocks: > + minItems: 1 > + items: > + - description: Runtime clock source. It must be a clock > + source for the RTC module. It will be disabled by hardware > + during Standby/Suspend. > + - description: Standby/Suspend clock source. It is optional > + and can be used in case the RTC will continue ticking during > + platform/system suspend. RTC hardware module contains a > + hardware mux for clock source selection. > + > + assigned-clock-parents: > + description: List of phandles to each parent clock. > + > + assigned-clock-rates: > + description: List of frequencies for RTC clock sources. > + RTC module contains 2 hardware divisors which can be > + enabled or not. Hence, available frequencies are the following > + parent_freq, parent_freq / 512, parent_freq / 32 or > + parent_freq / (512 * 32) Needn't assigned-* > + > +required: > + - compatible > + - reg > + - interrupts > + - "#clock-cells" > + - clocks > + - clock-names > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + > + rtc0: rtc@40060000 { needn't label > + compatible = "nxp,s32g3-rtc", > + "nxp,s32g2-rtc"; > + reg = <0x40060000 0x1000>; > + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; > + #clock-cells = <1>; > + clocks = <&clks 54>; > + clock-names = "ipg"; > + /* > + * Configuration of default parent clocks. > + * 'assigned-clocks' 0-3 IDs are Runtime clock sources > + * 4-7 IDs are Suspend/Standby clock sources. > + */ > + assigned-clocks = <&rtc0 2>, <&rtc0 4>; > + assigned-clock-parents = <&clks 56>, <&clks 55>; > + /* > + * Clock frequency can be divided by value > + * 512 or 32 (or both) via hardware divisors. > + * Below configuration: > + * Runtime clock source: FIRC (51 MHz) / 512 (DIV512) > + * Suspend/Standby clock source: SIRC (32 KHz) > + */ > + assigned-clock-rates = <99609>, <32000>; > + }; > -- > 2.45.2 >