From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx> This patch adds the dt-bindings for NXP S32G2/S32G3 SoCs RTC driver. Co-developed-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman@xxxxxxx> Signed-off-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman@xxxxxxx> Co-developed-by: Ghennadi Procopciuc <ghennadi.procopciuc@xxxxxxx> Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@xxxxxxx> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx> --- .../devicetree/bindings/rtc/nxp,s32g-rtc.yaml | 99 +++++++++++++++++++ 1 file changed, 99 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/nxp,s32g-rtc.yaml diff --git a/Documentation/devicetree/bindings/rtc/nxp,s32g-rtc.yaml b/Documentation/devicetree/bindings/rtc/nxp,s32g-rtc.yaml new file mode 100644 index 000000000000..3694af883dc7 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/nxp,s32g-rtc.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/nxp,s32g-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP S32G2/S32G3 Real Time Clock (RTC) + +maintainers: + - Bogdan Hamciuc <bogdan.hamciuc@xxxxxxx> + - Ciprian Marian Costea <ciprianmarian.costea@xxxxxxx> + +properties: + compatible: + oneOf: + - enum: + - nxp,s32g2-rtc + - items: + - const: nxp,s32g3-rtc + - const: nxp,s32g2-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#clock-cells": + const: 1 + + clocks: + items: + - description: ipg clock drives the access to the + RTC iomapped registers + + clock-names: + items: + - const: ipg + + assigned-clocks: + minItems: 1 + items: + - description: Runtime clock source. It must be a clock + source for the RTC module. It will be disabled by hardware + during Standby/Suspend. + - description: Standby/Suspend clock source. It is optional + and can be used in case the RTC will continue ticking during + platform/system suspend. RTC hardware module contains a + hardware mux for clock source selection. + + assigned-clock-parents: + description: List of phandles to each parent clock. + + assigned-clock-rates: + description: List of frequencies for RTC clock sources. + RTC module contains 2 hardware divisors which can be + enabled or not. Hence, available frequencies are the following + parent_freq, parent_freq / 512, parent_freq / 32 or + parent_freq / (512 * 32) + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + rtc0: rtc@40060000 { + compatible = "nxp,s32g3-rtc", + "nxp,s32g2-rtc"; + reg = <0x40060000 0x1000>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&clks 54>; + clock-names = "ipg"; + /* + * Configuration of default parent clocks. + * 'assigned-clocks' 0-3 IDs are Runtime clock sources + * 4-7 IDs are Suspend/Standby clock sources. + */ + assigned-clocks = <&rtc0 2>, <&rtc0 4>; + assigned-clock-parents = <&clks 56>, <&clks 55>; + /* + * Clock frequency can be divided by value + * 512 or 32 (or both) via hardware divisors. + * Below configuration: + * Runtime clock source: FIRC (51 MHz) / 512 (DIV512) + * Suspend/Standby clock source: SIRC (32 KHz) + */ + assigned-clock-rates = <99609>, <32000>; + }; -- 2.45.2
