Re: [PATCH v7 3/6] dt-bindings: mfd: Add Realtek RTL9300 switch peripherals

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 17 Oct 2024, Chris Packham wrote:

> Add device tree schema for the Realtek RTL9300 switches. The RTL9300
> family is made up of the RTL9301, RTL9302B, RTL9302C and RTL9303. These
> have the same SoC differ in the Ethernet switch/SERDES arrangement.
> 
> Currently the only supported features are the syscon-reboot and i2c
> controllers. The syscon-reboot is needed to be able to reboot the board.
> The I2C controllers are slightly unusual because they each own an SCL
> pin (GPIO8 for the first controller, GPIO 17 for the second) but have 8
> common SDA pins which can be assigned to either controller (but not
> both).
> 
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> ---
> 
> Notes:
>     Changes in v7:
>     - Set additionalProperties: false
>     - Remove extraneous examples from i2c binding
>     Changes in v6:
>     - Drop wildcard compatible
>     - Add specific compatibles for the 4 known SoC variants
>     - For the i2c part of the binding accept realtek,rtl9301 as a fallback
>       for the other compatibles
>     - The overall switches will eventually differ because these will have
>       different SERDES/port arrangements so they aren't getting the same
>       fallback treatment
>     Changes in v5:
>       I've combined the two series I had in flight so this is the
>       combination of adding the switch syscon, the reboot and i2c. It makes
>       the changelog a bit meaningless so I've dropped the earlier
>       commentary.
>     
>       As requested I've put a more complete example in the main
>       rtl9300-switch.yaml.
>     
>       I've kept rtl9300-i2c.yaml separate for now but link to it with a $ref
>       from rtl9300-switch.yaml to reduce clutter. The example in
>       rtl9300-i2c.yaml is technically duplicating part of the example from
>       rtl9300-switch.yaml but I feel it's nice to be able to see the example
>       next to where the properties are defined.
> 
>  .../bindings/i2c/realtek,rtl9301-i2c.yaml     |  69 +++++++++++
>  .../bindings/mfd/realtek,rtl9301-switch.yaml  | 114 ++++++++++++++++++

Can you separate these out so I can apply the MFD part please?

-- 
Lee Jones [李琼斯]




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux