As requested I've combined my two series into a single one to provide some better context for reviewers. I'm not sure which trees the patches should go in via. The first two have already been applied by Sebastian (thanks). The binding and dts changes (patches 3-5) would make sense to go in via linux-mips with acks from the dt maintainers and the driver itself (patch 6) can go via linux-i2c. -- 2.46.1 Chris Packham (6): dt-bindings: reset: syscon-reboot: Add reg property power: reset: syscon-reboot: Accept reg property dt-bindings: mfd: Add Realtek RTL9300 switch peripherals mips: dts: realtek: Add syscon-reboot node mips: dts: realtek: Add I2C controllers i2c: Add driver for the RTL9300 I2C controller .../bindings/i2c/realtek,rtl9301-i2c.yaml | 69 +++ .../bindings/mfd/realtek,rtl9301-switch.yaml | 114 +++++ .../bindings/power/reset/syscon-reboot.yaml | 11 +- MAINTAINERS | 7 + .../cameo-rtl9302c-2x-rtl8224-2xge.dts | 2 +- arch/mips/boot/dts/realtek/rtl9302c.dtsi | 15 + arch/mips/boot/dts/realtek/rtl930x.dtsi | 29 ++ drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-rtl9300.c | 425 ++++++++++++++++++ drivers/power/reset/syscon-reboot.c | 3 +- 11 files changed, 683 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml create mode 100644 Documentation/devicetree/bindings/mfd/realtek,rtl9301-switch.yaml create mode 100644 arch/mips/boot/dts/realtek/rtl9302c.dtsi create mode 100644 drivers/i2c/busses/i2c-rtl9300.c -- 2.47.0
