Re: [PATCH v10 4/4] ARM: dts: mxs: Add descriptions for imx287 based btt3-[012] devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 31 Oct 2024 11:57:22 +0100
Stefan Wahren <wahrenst@xxxxxxx> wrote:

> Hi Lukasz,
> 
> Am 31.10.24 um 11:34 schrieb Lukasz Majewski:
> > Hi Stefan,
> >  
> >> Am 31.10.24 um 09:42 schrieb Lukasz Majewski:  
> >>> Dear Community,
> >>>  
> >>>> The btt3 device' HW revisions from 0 to 2 use imx287 SoC and are
> >>>> to some extend similar to already upstreamed XEA devices, hence
> >>>> are using common imx28-lwe.dtsi file.
> >>>>
> >>>> New, imx28-btt3.dtsi has been added to embrace common DTS
> >>>> properties for different HW revisions for this device.
> >>>>
> >>>> As a result - changes introduced in imx28-btt3-[012].dts are
> >>>> minimal.
> >>>>
> >>>> Signed-off-by: Lukasz Majewski <lukma@xxxxxxx>
> >>>>
> >>>> ---
> >>>> Changes for v2:
> >>>> - Rename dts file from btt3-[012] to imx28-btt3-[012] to match
> >>>> current linux kernel naming convention
> >>>> - Remove 'wlf,wm8974' from compatible for codec@1a
> >>>>
> >>>> Changes for v3:
> >>>> - Keep alphabethical order for Makefile entries
> >>>>
> >>>> Changes for v4:
> >>>> - Change compatible for btt3 board (to 'lwn,imx28-btt3')
> >>>>
> >>>> Changes for v5:
> >>>> - Combine patch, which adds btt3-[012] with one adding board
> >>>> entry to fsl.yaml
> >>>>
> >>>> Changes for v6:
> >>>> - Make the patch series for adding entry in fsl.yaml and btt3
> >>>>
> >>>> Changes for v7:
> >>>> - Use "panel" property as suggested by the community
> >>>> - Use panel-timing to specify the display parameters
> >>>> - Update subject line with correct tags
> >>>>
> >>>> Changes for v8:
> >>>> - Use GPIO_ACTIVE_HIGH instead of '0'
> >>>> - Add the comment regarding mac address specification
> >>>> - Remove superfluous comment
> >>>> - Change wifi-en-pin node name
> >>>>
> >>>> Changes for v9:
> >>>> - Remove not used 'pm-ignore-notify'
> >>>> - Add display names for 'panel-dpi' compatible to avoid Schema
> >>>> warnings
> >>>>
> >>>> Changes for v10:
> >>>> - Drop new line with panel-timing definitions
> >>>> - Add new lines with 'sound' node
> >>>> - Change 'codec' to 'audio-codec'
> >>>> - Change order of properties for saif1 node  
> >>> Are there any more comments regarding this patch?  
> >> Sorry, i wasn't aware that you are waiting for reviews after Rob's
> >> request.  
> > I did not received any mail from Rob's automated DTS test script, so
> > this is a good thing :-).  
> I meant his comment to patch 2 V10. This patch "depends" on the
> binding.

Yes on patch 1.

> >
> >
> > Best regards,
> >
> > Lukasz Majewski
> >
> > --
> >
> > DENX Software Engineering GmbH,      Managing Director: Erika Unter
> > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> > Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
> > lukma@xxxxxxx  
> 




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@xxxxxxx

Attachment: pgpXSZ0TF1HRG.pgp
Description: OpenPGP digital signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux