Add a basic device tree for the Kobo Clara 2E Ebook reader. It is equipped with an i.MX6SLL SoC. EPDC PMIC drivers are not ready for mainline yet. Changes in V3: - removed 30MegaOhm current sense resistor nonsense Changes in V2: - improved commit message about devices without binding Andreas Kemnade (3): dt-bindings: arm: fsl: add compatible strings for Kobo Clara 2E ARM: dts: imx: Add devicetree for Kobo Clara 2E ARM: imx_v6_v7_defconfig: Enable drivers for Kobo Clara 2E .../devicetree/bindings/arm/fsl.yaml | 8 + arch/arm/boot/dts/nxp/imx/Makefile | 2 + .../dts/nxp/imx/imx6sll-kobo-clara2e-a.dts | 23 + .../dts/nxp/imx/imx6sll-kobo-clara2e-b.dts | 23 + .../nxp/imx/imx6sll-kobo-clara2e-common.dtsi | 514 ++++++++++++++++++ arch/arm/configs/imx_v6_v7_defconfig | 2 + 6 files changed, 572 insertions(+) create mode 100644 arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dts create mode 100644 arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dts create mode 100644 arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-common.dtsi -- 2.39.5
